3-TON-Ductless-Mini-Split-Air-Conditioner-Heat-Pump-CEILING-FLOOR-36000-BTU-01-srcy

3 TON Ductless Mini Split Air Conditioner, Heat Pump CEILING FLOOR, 36000 BTU

3 TON Ductless Mini Split Air Conditioner, Heat Pump CEILING FLOOR, 36000 BTU
3 TON Ductless Mini Split Air Conditioner, Heat Pump CEILING FLOOR, 36000 BTU
3 TON Ductless Mini Split Air Conditioner, Heat Pump CEILING FLOOR, 36000 BTU
3 TON Ductless Mini Split Air Conditioner, Heat Pump CEILING FLOOR, 36000 BTU
3 TON Ductless Mini Split Air Conditioner, Heat Pump CEILING FLOOR, 36000 BTU

3 TON Ductless Mini Split Air Conditioner, Heat Pump CEILING FLOOR, 36000 BTU
36000 BTU Ductless Split AC: CEILING-FLOOR. Inverter w/ 36,000 BTU Heat Pump. Thermocore T3C18S-H236-ED T3 Series Ductless Mini Split : Suspended Ceiling-Floor Mount. 36000 BTU Inverter Cooling Capacity along with a 36,000 BTU Heat Pump, this 3 TON Ductless Split can cool or heat an area over 1600 ft². Advanced INVERTER DC Technoloy provides both energy efficient operation and low ambient operation down to 5 degrees in both heat and cool mode. Head suspends from ceiling or placed upright on floor. Comes pre-charged with R410A and includes complete install Kit. 36,000 BTU INVERTER Heat Pump. 17.5 SEER – 10.5 HSPF – AHRI CERTIFIED. Pre-Charged with ECO-Friendly R410A. Indoor Unit – Suspended Ceiling Air Handler. Outdoor Unit – Compressor. Digital Multi-function LCD Remote Control. Installation Kit with 15ft of lineset and wire. Product and Installation Manual. 17.5 SEER – 10.5 HSPF – 9.0 EER. Suspended from ceiling or floor placement. Pre-Charged w/ Eco-friendly R410A Refrigerant. Ideal for Large Commercial Applications. Built in Drain Pump removes Moisture. Cross Flow Technology reduces noise output. Freon Leak Detection > Notification system. Low Ambient Temperature Operation (5° F). Restart IC: Settings restored Following Outage. Follow-Me Function tracks Remote Location. 230 V / 60 Hz / 1Ph. Body Dimensions (W x D x H). 50.6″ x 26.6″ x 9.25 inches. 208-230 V / 60 Hz, 1Ph. R410A / 25ft (Pre-Charged). 5 – 122 F. Dimensions (W x D x H). 37.24 x 16.14 x 31.9inches. 15 Feet Flared Copper Tubing. 15 Feet Pipe Insulation. 15 Feet Electrical Wire Harness. Hanging Bracket Kit for Indoor Unit. Binding Belt – Catchment Trough. Remote Control and Install manuals. Extend included 15 foot copper lineset to 25-30-40-50-60-75 feet. WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling technology of the HVAC field. They are called “DC inverter” because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. The current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result in different running speeds of the compressor. Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter AC’s bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Conditioners Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter the heat loss or heat gain of the building. Constant temperature is maintained. BASIC OVERVIEW: The installation of a suspended ceiling mount is much like that of a ductless mini split with the exception that instead of a wall mounted air handler, a suspended ceiling unit mounts hanging from a ceiling or positioned on a flat surface. The indoor unit (ceiling cassette) and outdoor unit (condenser) are connected to each other by means of refrigerant copper tubing and electrical cables that are routed through the ceiling and outside to the condenser outputs via a 2-3 inch hole. The compressor comes pre-charged with freon however, procedures such as conducting leak tests etc. Are still important steps in ensuring proper functioning of a ceiling cassette system. Although the installation may seem easy to some, certain tools and experience is necessary to complete installation of a ceiling cassette system. 5 Year Compressor – 1 Year on all other Parts Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not “plug-n-play” units that can be properly installed without certain tools any prior HVAC – electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. SHIPS TO TO BOTH UNITED STATES AND CANADIAN LOCATIONS! SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Failure to provide valid contact# will delay order. Provides Flat even surface – Avoids debris obstruction. Lineset Extension (3/8 x 5/8). Extend included 16 ft copper lineset to 25ft – 30ft – 40ft – 50ft. Mount your condenser at any height on an outdoor sidewall. Required when mounting air handler on Interior wall. Ceiling for Wall Mount. The item “3 TON Ductless Mini Split Air Conditioner, Heat Pump CEILING FLOOR, 36000 BTU” is in sale since Saturday, December 3, 2016. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Ductless Split System Air Conditioners”. The seller is “thermospace_acs” and is located in Warren, Michigan. This item can be shipped to United States, Canada.
  • Brand: Thermocore
  • MPN: Does Not Apply
  • Type: Split System
  • Energy Star: Not Compliant
  • Cooling BTU/Hr: 36000
  • SEER: 17
  • Features: Heat/Heat Pump
  • Size: 3 tons
  • Power Source: Electric
  • Model: T318S-H236-ED

3 TON Ductless Mini Split Air Conditioner, Heat Pump CEILING FLOOR, 36000 BTU