https://jamesnewtonmechanical.com Sun, 17 May 2026 18:42:46 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://jamesnewtonmechanical.com/12v-6-ton-electric-hydraulic-car-jack-van-suv-workshop-garage-floor-jack-lifting/ https://jamesnewtonmechanical.com/12v-6-ton-electric-hydraulic-car-jack-van-suv-workshop-garage-floor-jack-lifting/#comments Tue, 22 Dec 2020 20:48:26 +0000 http://jamesnewtonmechanical.com/12v-6-ton-electric-hydraulic-car-jack-van-suv-workshop-garage-floor-jack-lifting/ Read More]]>













You may also like. 12V 6 Ton Electric Hydraulic Car Jack Van SUV Workshop Garage Floor Jack Lifting. [High Stability] :This 6 Ton. Electric hydraulic jack are made by heavy-duty thick steel plate with integral anti-oxidation coating body which is rust-proof and wear-resistant. The large contact surface design enhances the stability, and the reinforced solid screw prevents the electric car jack from tearing or twisting. An essential tool for outdoor emergencies. You can plug it directly with a power outlet or battery on the car 12V DC. Press the controller button long enough, and the car/SUV will rise, which can boost the car/SUV in less than a minute due to the large load capacity of 6 Ton(13227lbs). Vehicles under 6 tons can be upgraded easily, and the lifting height ranges from 15cm to 47cm. Built-in safety device prevents the jack from falling even out of power and the jack will stop working automatically when reaching the height limit. For vehicle repairing and tire replacing. Suitable for sedans, off-road vehicles, vans, light-duty trucks or any vehicle suits its capacity. Favorable emergency tool for garages, repair shops, families and off-road usage. Working voltage: 12V DC. 6 tons(13227 lb). 30 x 17 cm / 11.8 inches x 6.7 inches. 1x car electric jack with controller. 1x power cord with clip. 1x cigarette lighter power cord. Please read the user manual carefully before using. The jack cover is plastic. When carrying, use the handle and do not carry by the pressure rod. To avoid damage, do not overhaul the machine. Do not use for an extended period of time. Do not submerge in water or use if in poor condition. Be sure your power source will match a 12V car cigarette lighter before using. Note floor surface and loading capacity when in use. Also find an exact car loading position before operating the lift. We are a professional worldwide Professional company. We are reliable supplier to both wholesalers and retail sellers. We supply many products on Automobile consumer. Also offer reasonable prices , excellent customer service and a reliable credit standing are our target! All messages be reply within 24 hours. Welcome your any-time parchase! The item “12V 6 Ton Electric Hydraulic Car Jack Van SUV Workshop Garage Floor Jack Lifting” is in sale since Thursday, November 12, 2020. This item is in the category “Vehicle Parts & Accessories\Garage Equipment & Tools\Workshop Equipment & Supplies\Jacks & Jack Stands”. The seller is “cartools2019″ and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe.

• Country/Region of Manufacture: China
• Material: Metal
• Capacity: 6 t
• Type: Floor Jack
• Manufacturer Part Number: Does Not Apply
• Vehicle Type: Heavy Duty/Commercial
• Minimum Height: 150mm
• Brand: AUTOOL
• Drive: Electrical
• Set or Single Item: Set
• Maximum Lift Height: 470mm

]]> https://jamesnewtonmechanical.com/12v-6-ton-electric-hydraulic-car-jack-van-suv-workshop-garage-floor-jack-lifting/feed/ 0 https://jamesnewtonmechanical.com/12v-5-ton-car-electric-hydraulic-floor-jack-with-impact-wrench-workshop-garage/ https://jamesnewtonmechanical.com/12v-5-ton-car-electric-hydraulic-floor-jack-with-impact-wrench-workshop-garage/#comments Sun, 15 Nov 2020 10:39:10 +0000 http://jamesnewtonmechanical.com/12v-5-ton-car-electric-hydraulic-floor-jack-with-impact-wrench-workshop-garage/ Read More]]>













You may also like. 12V 5 Ton Car Electric Hydraulic Floor Jack with Impact Wrench Workshop Garage. The 12V DC Automatic Electric Car Repair Tool Kit is worth having for emergency roadside tire change and repair. Cross groove saddle prevent slipping from vehicle. Rotating threaded rod can be spin out, makes cross groove saddle closer to lifting point. In case of the power has been disconnected, self-locking power structure and safety unloading knob prevent jack from falling and will not come down immediately. When re-connecting the power, jack will go on working in accordance with the instruction, or using the safety valve manually to fall. LED lamp on jack can be used as flashlight. Work with 12V vehicle power outlet, 5.0T(11023lb) jack capacity. Super low pressure rod, set for the sports car. Double motor driver inside, work independently. Lift the car in less than a minute by the jack, change a tire quickly, perfect tire jack. Non-slip cross groove design. The design of the jack is succinct and easy to operate with compact and organized storage box. Jack, pump and LED Flashlight can meet multiple demands. Matching with the relevant complete small tools, like safety hammer, gloves. With BMC packing, easy to carry. Engineering ABS shell to make it stronger. The structure is stable and secure. Machine will stop working when it lifts beyond the height limit. More widen aluminum plate to make it stable. More hidden heat dissipation mouth to prevent water splashing. Min Height:155mm(6.1). Loading Car Weight:5T. Lifting range:15-450mm(6.1″-17.7″). Power Cable:3.5m(137.8). Jack size:311514.5cm(12.2″5.9″5.7). Jack weight: 4.7kg. Plastic box size:L36W22H18cm(14.2″8.7″7.1). For Electric Inflator Pump. Air Flow: 9.2 gal/min (35 L/min). Max Pressure: 10 BAR/150 PSI. Hose Length: 25.6 in. Operating Voltage:DC 12. Power Cable:3.5M(137.8inch). Wrench size:25x9x13.5cm(9.83.55.3inch). Weight:2.85/3.1KG. Plastic box size:30.5×20.5×10.5cm(128.14.1inch). Package include: 1electric hydraulic floor jack. 1safe hammer 1plastic tool box 1battery clamp connecting cable 2gloves 1power cable 1instruction manual. We are a professional worldwide Professional company. We are reliable supplier to both wholesalers and retail sellers. We supply many products on Automobile consumer. Also offer reasonable prices , excellent customer service and a reliable credit standing are our target! All messages be reply within 24 hours. Welcome your any-time parchase! The item “12V 5 Ton Car Electric Hydraulic Floor Jack with Impact Wrench Workshop Garage” is in sale since Wednesday, September 2, 2020. This item is in the category “Vehicle Parts & Accessories\Garage Equipment & Tools\Workshop Equipment & Supplies\Jacks & Jack Stands”. The seller is “cartools2019″ and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe.

• Country/Region of Manufacture: China
• Material: Aluminium
• Type: Floor Jack
• Capacity: 11023lbs
• Max.Loading Car Weight: 5T
• Jack size: 31*15*14.5cm(12.2″*5.9″*5.7″)
• Manufacturer Part Number: Does Not Apply
• Vehicle Type: Heavy Duty/Commercial
• Jack weight: 4.7kg
• Wrench size: 25x9x13.5cm(9.8*3.5*5.3inch)
• Warranty: 1 Year
• Feature: built-in flash LED light
• Input Voltage: 12V DC
• GTIN: 5055462701403
• Minimum Height: 155mm(6.1″)
• Brand: Unbranded
• Drive: Electrical
• Set or Single Item: Set
• Maximum Lift Height: 450mm(17.7″)

]]> https://jamesnewtonmechanical.com/12v-5-ton-car-electric-hydraulic-floor-jack-with-impact-wrench-workshop-garage/feed/ 0