https://jamesnewtonmechanical.com Sun, 17 May 2026 18:42:46 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://jamesnewtonmechanical.com/toyota-material-handling-products-1-ton-core-electric/ https://jamesnewtonmechanical.com/toyota-material-handling-products-1-ton-core-electric/#comments Wed, 15 Oct 2025 21:34:31 +0000 https://jamesnewtonmechanical.com/toyota-material-handling-products-1-ton-core-electric/ ]]> https://jamesnewtonmechanical.com/toyota-material-handling-products-1-ton-core-electric/feed/ 0 https://jamesnewtonmechanical.com/3ton-sanitary-centrifugal-pump-lift-52ft-corrosion-resistant-material-transfer/ https://jamesnewtonmechanical.com/3ton-sanitary-centrifugal-pump-lift-52ft-corrosion-resistant-material-transfer/#comments Sat, 15 Feb 2025 08:13:47 +0000 https://jamesnewtonmechanical.com/3ton-sanitary-centrifugal-pump-lift-52ft-corrosion-resistant-material-transfer/ Read More]]>



















316 Stainless steel Sanitary centrifugal pump. Stainless steel centrifugal pump is specificalized for all the products which are related to food, such as dairy products, beverages, food, cosmetics, food additives, fine chemicals. The centrifugal pump applies centrifugal force to produce speed, using a rotating impeller to increase the speed and push the fluid through the outlet valve. Lift of a pump. Inlet pipe diameter(external diameter). 1.49IN(3.8CM). Outlet pipe diameter(external diameter). 1.26IN(3.2CM). This Centrifugal Pump uses new design machine seal which will not contact the materials. Adopts high efficient and powerful motor, 316 Stainless Steel. Heavy duty of 3 Tons / hour. The clamp is flexibly connected with avariety of inlet and outlet options. Selected stainless steel, durable, customerscan replace different interfaces (we are standard interface). High quality bearings have a longer service life, higher accuracy, lower noise, higher rotational speed, and are less prone to overheating compared to similar bearings, with high cost-effectiveness. Fine sealing ring, better sealing performance, and relatively longer service life. Corrosion resistance, pressure resistance, and relatively resistant to deformation. Do not switch on the pump when it is empty. It will be easily damaged if the pump is operating with no liquid for a little while. Please be sure that there is enough liquid in the pump before you switch on! Do not use this pump with paste or sticky liquid, such as butter, Peanut butter, honey and syrup etc. Do not use this pump with liquid of strong acid and alkali. Do not use this pump with high proof spirits or alcohol. The installation foundation of the pump shall generally be a flat ground with sufficient strength, which shall be installed at the lowest position of the equipment as far as possible, that is, the position with the maximum lift height. Do not idle the machine to prevent burning the motor. Lifting height will affect the flow of the pump outlet, it is recommended that customers in the use of the pump, the outlet is best to install additional valves to control the water flow, so as not to overload to burn the machine.

]]> https://jamesnewtonmechanical.com/3ton-sanitary-centrifugal-pump-lift-52ft-corrosion-resistant-material-transfer/feed/ 0 https://jamesnewtonmechanical.com/1ton-2200lbs-electric-hoist-trolley-110v-with-i-beam-links-for-material-handling-2/ https://jamesnewtonmechanical.com/1ton-2200lbs-electric-hoist-trolley-110v-with-i-beam-links-for-material-handling-2/#comments Thu, 24 Aug 2023 07:06:33 +0000 https://jamesnewtonmechanical.com/1ton-2200lbs-electric-hoist-trolley-110v-with-i-beam-links-for-material-handling-2/ Read More]]>














This is a new electric hoist trolley, with I-beam links, can be used as electric hoist or pulley hoisting point, working on the straight track. Specification: Color: Red + Black Material: All-copper motor Type: TD1 Rated capacity :1t/2200lb Test load: 1.2t/2645lb Standard working height: 3 m/10 ft Moving speed: 16.4 m/min 53.8 ft/min Motor power: 500W Motor speed: 1400r/min Minimum Curve Track Radius: 1 m/3.28 inch Telecontrol cable length: 1.2m/4ft Package Included: 1 x Electric Trolley 1 x Use manual Note: Please allow 1-3CM differs due to manual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. 1Ton Electric Wire Rope Hoist W/ Trolley 2200lbs 4ft lift I-beam HeavyDuty 110V USA. This is a new electric hoist trolley, with I-beam links. Can be used as electric hoist or pulley hoisting point, working on the straight track. Color: Red + Black. Test load: 1.2t/2645lb. Standard working height: 3 m/10 ft. Moving speed: 16.4 m/min 53.8 ft/min. Minimum Curve Track Radius: 1 m/3.28 inch. Telecontrol cable length: 1.2m/4ft. Refined housing: bow suspension rings, made of A4 steel, strong, impact resistance. Quenched gear: flexible rotation, low resistance, high tensile strength. Copper core, high temperature resistance. Handle switch, easy to operate and use. 1 x Electric Trolley. 1 x Use manual. Please allow 1-3CM differs due to manual measurement. Note:not Include Cable. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

]]> https://jamesnewtonmechanical.com/1ton-2200lbs-electric-hoist-trolley-110v-with-i-beam-links-for-material-handling-2/feed/ 0 https://jamesnewtonmechanical.com/1ton-2200lbs-electric-hoist-trolley-110v-with-i-beam-links-for-material-handling/ https://jamesnewtonmechanical.com/1ton-2200lbs-electric-hoist-trolley-110v-with-i-beam-links-for-material-handling/#comments Sun, 04 Jun 2023 20:00:09 +0000 https://jamesnewtonmechanical.com/1ton-2200lbs-electric-hoist-trolley-110v-with-i-beam-links-for-material-handling/ Read More]]>














This is a new electric hoist trolley, with I-beam links, can be used as electric hoist or pulley hoisting point, working on the straight track. Specification: Color: Red + Black Material: All-copper motor Type: TD1 Rated capacity :1t/2200lb Test load: 1.2t/2645lb Standard working height: 3 m/10 ft Moving speed: 16.4 m/min 53.8 ft/min Motor power: 500W Motor speed: 1400r/min Minimum Curve Track Radius: 1 m/3.28 inch Telecontrol cable length: 1.2m/4ft Package Included: 1 x Electric Trolley 1 x Use manual Note: Please allow 1-3CM differs due to manual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. 1 Ton Electric Chain Hoist Motor Speed 1400r/Min Power Trolley 500w. 1Ton Electric Wire Rope Hoist W/ Trolley 2200lbs 4ft lift I-beam HeavyDuty 110V USA. This is a new electric hoist trolley, with I-beam links. Can be used as electric hoist or pulley hoisting point, working on the straight track. Color: Red + Black. Test load: 1.2t/2645lb. Standard working height: 3 m/10 ft. Moving speed: 16.4 m/min 53.8 ft/min. Minimum Curve Track Radius: 1 m/3.28 inch. Telecontrol cable length: 1.2m/4ft. Refined housing: bow suspension rings, made of A4 steel, strong, impact resistance. Quenched gear: flexible rotation, low resistance, high tensile strength. Copper core, high temperature resistance. Handle switch, easy to operate and use. 1 x Electric Trolley. 1 x Use manual. Please allow 1-3CM differs due to manual measurement. Note:not Include Cable. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Business & Industrial\Material Handling\Hoists, Winches & Rigging\Cranes & Hoists\Other Cranes & Hoists”. The seller is “dovipshopping” and is located in this country: US. This item can be shipped to United States.

• Characteristic：: Convenient Use,Easy Operation,Easy installation
• size: 35.5*38*18cm
• Suitable models: PA600, PA800, PA1000
• Brand: Unbranded
• Color: Red + Black
• Material: All-copper motor
• Type: TD1
• Rated capacity: 1t/2200lb
• Test load: 1.2t/2645lb
• Standard working height: 3 m/10 ft
• Moving speed: 16.4 m/min 53.8 ft/min
• Motor power: 500W
• Motor speed: 1400r/min
• Minimum Curve Track Radius: 1 m/3.28 inch
• Telecontrol cable length: 1.2m/4ft

]]> https://jamesnewtonmechanical.com/1ton-2200lbs-electric-hoist-trolley-110v-with-i-beam-links-for-material-handling/feed/ 0