https://jamesnewtonmechanical.com Wed, 28 Oct 2026 18:46:41 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://jamesnewtonmechanical.com/pneumatic-crimping-tool-am-10-pneumatic-wire-terminal-crimper-with-15-sets-dies/ https://jamesnewtonmechanical.com/pneumatic-crimping-tool-am-10-pneumatic-wire-terminal-crimper-with-15-sets-dies/#comments Sat, 08 Aug 2026 05:15:43 +0000 https://jamesnewtonmechanical.com/pneumatic-crimping-tool-am-10-pneumatic-wire-terminal-crimper-with-15-sets-dies/ Read More]]>









Powered by compressed air and operated with a convenient foot pedal, this heavy-duty crimper significantly reduces hand fatigue while delivering powerful 1.3-ton crimping force for professional electrical wiring applications. Ideal for electrical assembly, automotive wiring, industrial manufacturing, control panels, maintenance, and repair work. Powerful Pneumatic Performance. Maximum Output Force: 1.3 Ton. Working Pressure: 0.5-0.7 MPa. Maximum Pressure: 1.0 MPa. Recommended Operating Pressure: 0.5 MPa. Double-acting standard air cylinder for fast, reliable crimping. Provides consistent, professional-quality crimps with minimal operator effort. Includes 15 Interchangeable Die Sets. Comes complete with 15 crimping die sets, allowing compatibility with a wide variety of electrical terminals for multiple applications. Non-insulated terminals up to 16 mm². Pre-insulated terminals up to 6 mm². Tube/Ferrule terminals up to 35 mm². Perfect for workshops, electricians, automotive technicians, and industrial users. Foot Pedal Operation. The included foot valve allows hands-free operation for greater efficiency and improved productivity. Heavy-Duty Steel Construction. Manufactured from high-strength steel for exceptional durability and long service life. Built for demanding daily use. Easy Installation & Portability. Carrying handle for easy transport. Ideal for both workshop and mobile service applications. Power Source: Pneumatic (Compressed Air). Output Force: 1.3 Ton. Recommended Pressure: 0.5 MPa. Air Hose Size: 8mm. Operation: Foot Pedal Controlled. 15 × Interchangeable Crimping Die Sets. 1 × Foot Valve. 1 × 8mm Air Hose. Commercial and DIY projects. Instruction manual is not included. Always disconnect the air supply before changing crimping dies. Operate only within the recommended pressure range. Follow all appropriate safety procedures during installation and use.

]]> https://jamesnewtonmechanical.com/pneumatic-crimping-tool-am-10-pneumatic-wire-terminal-crimper-with-15-sets-dies/feed/ 0 https://jamesnewtonmechanical.com/12-ton-electric-hydraulic-crimping-tool-with-9-dies-for-wire-terminals/ https://jamesnewtonmechanical.com/12-ton-electric-hydraulic-crimping-tool-with-9-dies-for-wire-terminals/#comments Wed, 13 May 2026 18:34:43 +0000 https://jamesnewtonmechanical.com/12-ton-electric-hydraulic-crimping-tool-with-9-dies-for-wire-terminals/ Read More]]>













Discover the power of efficient cable lug crimping with our electric hydraulic tool. Designed for professionals who demand reliability and precision in their electrical work. US standard crimping die: pressure – 12 tons, 9 (1/8’12 AWG, 10 AWG, 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1/0 AWG, 2/0 AWG). Electric crimping tools: two rechargeable lithium batteries, 9 crimping dies, operation manuals, gloves, maintenance and replacement parts. High efficiency: Pure copper wire motor, hydraulic drive, the motor operates more smoothly and consumes less power. Compact and portable: This crimping tool is lighter than ordinary crimping tools. Its compact body makes it convenient to carry and store, and it has a longer battery life.

]]> https://jamesnewtonmechanical.com/12-ton-electric-hydraulic-crimping-tool-with-9-dies-for-wire-terminals/feed/ 0 https://jamesnewtonmechanical.com/10-ton-electric-hydraulic-power-pipe-tube-bender-bending-1-1-12-1-34-dies/ https://jamesnewtonmechanical.com/10-ton-electric-hydraulic-power-pipe-tube-bender-bending-1-1-12-1-34-dies/#comments Wed, 26 Apr 2023 00:41:26 +0000 https://jamesnewtonmechanical.com/10-ton-electric-hydraulic-power-pipe-tube-bender-bending-1-1-12-1-34-dies/ Read More]]>













10 Ton Electric Hydraulic Power Pipe Tube Bender Bending 1″, 1-1/2″ 1-3/4 Dies. 3 Standard Dies 120 Degrees. 1″ x 3″, 1″ x 1-1/2″, 1-3/4″ x 6″. Optional Dies 120 Degrees available: 1-5/8″ x 5″ and 2″ x 6″ Not included. 2″ x 0.188 (Mild Steel) – 1-1-/2″ Schedule-40 (Nominal Pipe). 1-1/2 x 0.83 (Square Mild Steel). 1-1/8 (Solid Bar Mild Steel). 110V – 1-HP (0.75KW) – 10.2 A – 3,420 RPM. 3 Casters Base For Easy Mobility.’L x 29”W x 43”H Estimate Only. THANK YOU FOR VISITING. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Bending Machines”. The seller is “prolinemax” and is located in this country: US. This item can be shipped to United States.

• Power Source: Electric, Hydraulic
• Brand: Unbranded
• Voltage: 110 V

]]> https://jamesnewtonmechanical.com/10-ton-electric-hydraulic-power-pipe-tube-bender-bending-1-1-12-1-34-dies/feed/ 0 https://jamesnewtonmechanical.com/electric-hydraulic-power-pipe-tube-bender-10-ton-bending-1-1-12-1-34-dies/ https://jamesnewtonmechanical.com/electric-hydraulic-power-pipe-tube-bender-10-ton-bending-1-1-12-1-34-dies/#comments Wed, 29 Dec 2021 06:53:47 +0000 https://jamesnewtonmechanical.com/electric-hydraulic-power-pipe-tube-bender-10-ton-bending-1-1-12-1-34-dies/ Read More]]>










Electric Hydraulic Power Pipe Tube Bender 10 Ton Bending 1″, 1-1/2″ 1-3/4 Dies. Electric Hydraulic Foot Pedal. 3 Standard Dies 120 Degrees. 1″ x 3″, 1″ x 1-1/2″, 1-3/4″ x 6″. 2 x 0.188 (Mild Steel). 1-1-/2″ Schedule-40 (Nominal Pipe) – 1-1/2″ x 0.83 (Square Mild Steel). 1-1/8 (Solid Bar Mild Steel). 1-HP (0.75KW) – 10.2 A. 3,420 RPM. 3 Casters Base For Easy Mobility. Unit Dim L x W x H (in). 40 x 29 x 43. Unit Weight: 172 Pounds. The item “Electric Hydraulic Power Pipe Tube Bender 10 Ton Bending 1, 1-1/2 1-3/4 Dies” is in sale since Tuesday, September 28, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Bending Machines”. The seller is “dbmimports” and is located in Rosemead, California. This item can be shipped to United States.

• California Prop 65 Warning: WARNING: This products contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. ADVERTENCIA: Este producto coniene productos quimcos reconocidos por el estado de California que provocan cáncer, defectos de nacimiento u otros danos reproductivos For more information go to https://www.p65warnings.ca.gov/
• Power Source: Electric
• MPN: Does Not Apply
• Brand: Unbranded
• Voltage: 110 V

]]> https://jamesnewtonmechanical.com/electric-hydraulic-power-pipe-tube-bender-10-ton-bending-1-1-12-1-34-dies/feed/ 0 https://jamesnewtonmechanical.com/zupper-cyo-410-13-ton-hydraulic-electrical-cable-lug-crimper-dies-25-400mm2/ https://jamesnewtonmechanical.com/zupper-cyo-410-13-ton-hydraulic-electrical-cable-lug-crimper-dies-25-400mm2/#comments Sat, 27 Nov 2021 14:33:42 +0000 https://jamesnewtonmechanical.com/zupper-cyo-410-13-ton-hydraulic-electrical-cable-lug-crimper-dies-25-400mm2/ Read More]]>







Zupper CYO-410 13 Ton Hydraulic Crimper – Top Professional Industrial Quality Tool. Auto Pressure Cut Out. Crimp Head Swivels 180 Degrees. Crimps Cable Lugs 25 to 400 mm Cu. 50, 70, 95, 120, 150, 185, 240, 300 & 400mm Dies Included. Now with Extra 25 & 35 mm Dies. Comes with a Spare Seal Kit. Handy Carry Case. Quality Tradesman Crimper. Not Like the Cheaper Inferior Models Around! For More Information Call Stef Direct on. To Discuss Your Requirements. Quality Tools at Affordable Prices! Check Out Other Items We Have for Sale in our E/Bay Store. The item “ZUPPER CYO-410 13 TON HYDRAULIC ELECTRICAL CABLE LUG CRIMPER DIES 25 400mm2″ is in sale since Wednesday, June 26, 2019. This item is in the category “Industrial\Hand Tools\Other”. The seller is “sjp_imports” and is located in North Geelong, Victoria. This item can be shipped worldwide.

• Model: CYO-410
• Type: Hydraulic Crimper
• MPN: Does Not Apply
• Brand: ZUPPER

]]> https://jamesnewtonmechanical.com/zupper-cyo-410-13-ton-hydraulic-electrical-cable-lug-crimper-dies-25-400mm2/feed/ 0 https://jamesnewtonmechanical.com/vevor-pipe-bender-16-ton-hydraulic-tube-rod-bending-machine-12-3-8-dies-set/ https://jamesnewtonmechanical.com/vevor-pipe-bender-16-ton-hydraulic-tube-rod-bending-machine-12-3-8-dies-set/#comments Thu, 08 Jul 2021 05:50:06 +0000 http://jamesnewtonmechanical.com/vevor-pipe-bender-16-ton-hydraulic-tube-rod-bending-machine-12-3-8-dies-set/ Read More]]>













PROFESSIONAL PIPE BENDER 16T- Dead load: 16T, stroke: 130 mm(5.12″), adjustable height: 323 mm(12.9″) in minimum, 460 mm(18.1″) in maximum, bending range: 1/2″-3″(1.3-7.6 cm), diameter: 1/2″ (1.3 cm), oil capacity: 400 g(0.9 lbs). EXCELLENT STRUCTURE- 45# steel frame, work in any condition. Compact design, smooth appearance, wear resistance, saving time and labor on bending tubes. Stable four-feet design enhances working time and quality for continuously bending tubes. HUGE BENDING POSSIBILITY- This exhaust tubing bender allows tubes to be bent within 90-180 degrees, reducing your workload and increasing working efficiency (no more than 180 degree). EIGHT DIES INCLUDED- The hydraulic pipe bender comes with 8 dies of 1/2″, 3/4″, 1″, 1-1/4″, 1-1/12″, 2″, 2-1/2″ and 3″, available to meet different uses. High quality, accurate sizes, long life. SUITABLE FIELDS- Exhaust pipe bender can be used in building, chemical, plumbing, petrol, mines, shipbuilding and other industries. Suitable for most kinds of metal tubes, to bend any type of pipes. 45# steel frame, high strength, tough and wear resistant. Stable four-feet design allows for continuously bending tubes. This tube bender is heavy duty to hold up to 16 ton weight capacity. The hydraulic tubing bender bends tubes of all materials up to 90-180 degree(no more than 180 degree) safely and quickly, improving the work efficiency. Bending range: 1/2″ – 3″(1.3-7.6 cm). This tone bender comes with 8 dies of different sizes: 1/2″, 3/4″, 1″, 1-1/4″, 1-1/12″, 2″, 2-1/2″, 3″. High strength, good toughness, plasticity and relatively resistant to use, not easy to fracture. Adjust smoothly the height of the tool pipe bender from 330 mm(12.9″) to 460 mm(18.1″) with a non-slip rubber handle. Small size for easy to store and convenient to operate. The top tray, four legs and base of the dies exhaust bender are made from nodular cast iron, good welding and sealing, no leak, no pollution. Oil capacity: 400 g(0.9 lbs). The steel pipe bender is suitable for most kinds of metal tubes. Used for piping construction, motor craft, for the construction of roll cages, ramming protection, railing construction, etc. 16 Ton Hydraulic Pipe Bender. Here is our 16 ton hydraulic pipe bending tool, constructed with a heavy duty 45# steel frame, can handle tubes or pipes up to 3 wide. Bending bars can easily be adjusted freely. 8 precise dies in 1/2 diameter are included. The pipe bender is suit for bending welding steel tube which has low pressure to deliver liquid in cold situation, and bending common water pipe, carbon steel pipe and thick-wall conduit tube. Dead Load: 16 Ton. Stroke: 130 mm / 5.12. Adjustable Height: 323 mm / 12.9″ in Minimum, 460 mm / 18.1″ in Maximum. Bending Range: 1/2″ – 3″ / 1.3-7.6 cm. Sizes of Dies: 1/2″, 3/4″, 1″, 1-1/4″, 1-1/12″, 2″, 2-1/2″, 3″. Diameter: 1/2 / 1.3 cm. Oil Capacity: 400 g / 0.9 lbs. 1 x 16T Hydraulic Jack. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “VEVOR Pipe Bender 16 Ton Hydraulic Tube Rod Bending Machine 1/2-3 8 Dies Set” is in sale since Tuesday, January 29, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Pipe Tools\Pipe Benders”. The seller is “ganfeii1_4″ and is located in Perth Amboy, New Jersey. This item can be shipped to United States, Canada, Mexico.

• Model: 16 Ton Hydraulic Bender
• Application: Aluminum,Copper,Stainless Steel,Steel
• Material: Steel
• Dead Load: 16 Ton
• Stroke: 130 mm / 51.2″
• Adjustable Height: 181.1″-129.9″( 330-460mm)
• Bending Range: 1/2″-3″(1.3-7.6 mm)
• Diameter: 1/2″(1.3 mm)
• Color: Red
• Dies: 1/2″-3″
• Power Source: Electric
• MPN: 860-3
• Pipe/Tube Size: 2 in (51 mm)
• Brand: Greenlee

]]> https://jamesnewtonmechanical.com/vevor-pipe-bender-16-ton-hydraulic-tube-rod-bending-machine-12-3-8-dies-set/feed/ 0 https://jamesnewtonmechanical.com/new-edwards-55-ton-iron-worker-including-9-free-stand-round-punch-dies/ https://jamesnewtonmechanical.com/new-edwards-55-ton-iron-worker-including-9-free-stand-round-punch-dies/#comments Sun, 01 Nov 2020 08:37:08 +0000 http://jamesnewtonmechanical.com/new-edwards-55-ton-iron-worker-including-9-free-stand-round-punch-dies/ Read More]]>


W/ FREE ELECTRIC STROKE CONTROL. MUST SPECIFY 208V OR 230V. Includes 2 Factory installed LED Lights – improving operator visibility. MUST Contact for LEAD TIME. AND TO FIND OUT ABOUT TOOLING. & HOW TO GET 9 FREE STANDARD ROUND PUNCH & DIE SETS. This is one Great Deal from Nevins Tools, Inc. Edwards Ironworkers operate by applying hydraulic force to a moving center that moves within a frame in a simple, vertical path. It exerts force through shear blades, punch and die, notcher, brake dies, or bump-die tooling upon mild steel. Vertical travel of the moving center allows the operator to perform multiple operations on an Edwards Ironworker without removing any adjacent tooling. OUTSIDE USA – INQUIRE FIRST. I WILL BE LISTING OTHER EQUIPMENT. PLEASE CHECK MY FEEDBACK. SAVE MY USER ID IN YOUR FAVORITES. My goal is to turn all new buyers into repeat customers!! Due to my customer service skills and pricing, I have been successful in achieving this goal. 1/2″ x 12″ or 3/8″ x 14″. 4″ x 4″ x 1/4″ or 3″ x 3″ x 3/8″. For any further product information, customer service or tech support : Please call Todd Nevins. Any return must be in brand new condition, not used at all. If items are missing, or damages exist, quarantine the product and save the original packaging. All missing or damage claims must be communicated to Todd at Nevins Tools, Inc. Any claims made post the aforementioned three (3) day window will not be accepted. RECEIVING INSTRUCTIONS FOR VISIBLE SIGNS OF DAMAGE, OVERAGES OR SHORTAGES. Be specific with your notes, detailing any physical damage or quantity exceptions a. Examples broken stretch wrap, ; broken crate boards, ; forklift holes through product ABC123, ; Item ABC123 has holes in carton, ; only received 1 unit of Item ABC123, ; received 1 extra ABC123. If possible, take pictures of the damages. Immediately notify Todd Nevins at Nevins Tools, Inc. After any aforementioned circumstance. The item “NEW EDWARDS 55 TON IRON WORKER INCLUDING 9 FREE STAND. ROUND PUNCH & DIES” is in sale since Monday, June 15, 2015. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Textile & Apparel Equipment\Textile Machine Parts & Attachments”. The seller is “nevinstoolsinc” and is located in Albert Lea, Minnesota. This item can be shipped to United States.

• Model: 55 TON
• MPN: IW55-3P230
• Brand: EDWARDS

]]> https://jamesnewtonmechanical.com/new-edwards-55-ton-iron-worker-including-9-free-stand-round-punch-dies/feed/ 0 https://jamesnewtonmechanical.com/electric-21-ton-hydraulic-tube-pipe-bender-370mm-stroke-9-dies-12-to-4/ https://jamesnewtonmechanical.com/electric-21-ton-hydraulic-tube-pipe-bender-370mm-stroke-9-dies-12-to-4/#comments Fri, 09 Oct 2020 10:03:37 +0000 http://jamesnewtonmechanical.com/electric-21-ton-hydraulic-tube-pipe-bender-370mm-stroke-9-dies-12-to-4/ Read More]]>












Electric 21 Ton Hydraulic Tube Pipe Bender 370mm Stroke 9 Dies 1/2″ to 4″. Electric Hydraulic Pipe Bender. 0.84″ – 4.25″ (21.5 – 108 mm). 0.10″ -0.23″ (2.75 – 6 mm). 1/2″ 3/4″ 1″ 1-1/4″ 1-1/2″ 2″ 2-1/2″ 3″ 4. 330lbs / 297 lbs. THANK YOU FOR VISITING. The item “Electric 21 Ton Hydraulic Tube Pipe Bender 370mm Stroke 9 Dies 1/2 to 4″ is in sale since Monday, April 8, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Bending Machines”. The seller is “prolinemax” and is located in Los Angeles, California. This item can be shipped to United States.

• MPN: Does Not Apply
• Brand: Unbranded
• California Prop 65 Warning: WARNING: This products contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. ADVERTENCIA: Este producto coniene productos quimcos reconocidos por el estado de California que provocan cáncer, defectos de nacimiento u otros danos reproductivos
• UPC: Does not apply

]]> https://jamesnewtonmechanical.com/electric-21-ton-hydraulic-tube-pipe-bender-370mm-stroke-9-dies-12-to-4/feed/ 0 https://jamesnewtonmechanical.com/12-inch-4-inch-dies-21-ton-pressure-370mm-stroke-electric-pipe-tube-bender/ https://jamesnewtonmechanical.com/12-inch-4-inch-dies-21-ton-pressure-370mm-stroke-electric-pipe-tube-bender/#comments Wed, 02 Sep 2020 08:45:04 +0000 http://jamesnewtonmechanical.com/12-inch-4-inch-dies-21-ton-pressure-370mm-stroke-electric-pipe-tube-bender/ Read More]]>












Electric Pipe Tube Bender Set. 330 Pounds / 297 Pounds Rough Estimation. Wall Thickness: 0.0196 Inch To 0.0787 Inch (0.5-2mm). 9 Bending Dies: 1/2 Inch, 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch, 2 Inch, 2-1/2 Inch, 3 Inch, 3 Inch. Pipe Wall Thickness: 0.10 Inch -0.23 Inch (2.75 – 6 mm). Work Range: 0.84 Inch- 4.25 Inch (21.5 – 108 mm). Max Stroke:14-9/16 Inch (370 mm). Max Pressure:21 Ton. The item “1/2 Inch 4 Inch Dies 21 Ton Pressure 370mm Stroke Electric Pipe Tube Bender” is in sale since Friday, March 22, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Bending Machines”. The seller is “mhglobal” and is located in Monrovia, California. This item can be shipped to United States.

• MPN: Does Not Apply
• Brand: Unbranded
• California Prop 65 Warning: WARNING: This products contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. ADVERTENCIA: Este producto coniene productos quimcos reconocidos por el estado de California que provocan cáncer, defectos de nacimiento u otros danos reproductivos
• UPC: Does not apply

]]> https://jamesnewtonmechanical.com/12-inch-4-inch-dies-21-ton-pressure-370mm-stroke-electric-pipe-tube-bender/feed/ 0 https://jamesnewtonmechanical.com/21-ton-hydraulic-110v-electric-tube-pipe-bender-bending-with-12-to-4-dies/ https://jamesnewtonmechanical.com/21-ton-hydraulic-110v-electric-tube-pipe-bender-bending-with-12-to-4-dies/#comments Fri, 13 Mar 2020 19:07:37 +0000 http://jamesnewtonmechanical.com/21-ton-hydraulic-110v-electric-tube-pipe-bender-bending-with-12-to-4-dies/ Read More]]>











21 Ton Hydraulic 110v Electric Tube Pipe Bender Bending with 1/2″ to 4″ Dies. Electric Hydraulic Pipe Bender. Work Range: 0.84″ – 4.25″ (21.5 – 108 mm). Pipe Wall Thickness: 0.10″ -0.23″ (2.75 – 6 mm). Unit Dim L x W x H (in). 2-1/8 x 3/4 x 3/4 Estimated. Bending Dies: 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″, 2-1/2″, 3″, 4. 330 lbs / 297 lbs. The item “21 Ton Hydraulic 110v Electric Tube Pipe Bender Bending with 1/2 to 4 Dies” is in sale since Tuesday, April 9, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Bending Machines”. The seller is “dbmimports” and is located in Rosemead, California. This item can be shipped to United States.

• MPN: Does Not Apply
• Brand: Unbranded
• California Prop 65 Warning: WARNING: This products contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. ADVERTENCIA: Este producto coniene productos quimcos reconocidos por el estado de California que provocan cáncer, defectos de nacimiento u otros danos reproductivos
• UPC: Does not apply

]]> https://jamesnewtonmechanical.com/21-ton-hydraulic-110v-electric-tube-pipe-bender-bending-with-12-to-4-dies/feed/ 0