https://jamesnewtonmechanical.com Sat, 02 May 2026 05:56:48 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://jamesnewtonmechanical.com/5-ton-rheem-gas-electric-package-unit-3ph-230v-13-7-seer2-100k-btu-commercial/ https://jamesnewtonmechanical.com/5-ton-rheem-gas-electric-package-unit-3ph-230v-13-7-seer2-100k-btu-commercial/#comments Sun, 08 Feb 2026 16:00:53 +0000 https://jamesnewtonmechanical.com/5-ton-rheem-gas-electric-package-unit-3ph-230v-13-7-seer2-100k-btu-commercial/ Read More]]>








THIS UNIT REQUIRES 3 PHASE POWER, PLEASE CHECK YOUR ELECTRICAL SERVICE TO ENSURE COMPATIBILITY. RUUD® RGEAYB060ACT101NA Endeavor® Line Achiever® Series iR Gas/Electric Package Unit, 13.4 SEER2, 5.0 Ton, 3ph, 208/230/60, 60,000 BTU. New scratch and dent unit, April 2025 mfr. Please see detailed photos. Coil is dented as shown but not punctured, unit has pressure. RESIDENTIAL/LIMITED ACCESS/LIFTGATE SERVICES AVAILABLE FOR ADDITIONAL CHARGE. Scroll Compressors on all models: Provides maximum efficiency and quiet operation. MicroChannel Evaporator and Condenser Coil: Delivers superior performance with less refrigerant charge and less weight than conventional copper tube/aluminum fin coils. All aluminum construction has superior protection against formicary corrosion and aluminum tube rubbing potential. It is easier to clean and has a more robust surface. Thermal Expansion Valves: Standard on all models for precise superheat control, reliability, and energy efficiency at all operating conditions. High Pressure Control: Standard on all models for refrigerant component protection and reliability. Filter Drier: Standard on all models. 100% Factory Run Tested. PlusOne® Ignition System: Proven Direct Spark Ignition System (DSI) for reliability and longevity. PlusOne® Refrigerant Detection SystemT1: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation – if excess refrigerant is detected. Easily Accessible Control Box, Furnace Compartment and Blower Section with Slide-Out Blowerv. Double Sloped Evaporator Coil Drain Pan: Assures all water is removed from the unit to improve indoor air quality. Louvered Condenser Compartment: Protects the coil against yard hazards and/or weather extremes. Supply and Return Air Openings: Feature a one-inch-tall flange to prevent water migration into the ductwork. Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants with only minimal changes to system installation. For us, this is another step toward our continued sustain – ability goal of reducing greenhouse gas emissions, while still delivering an exceptional level if energy efficient, dependable comfort.

]]> https://jamesnewtonmechanical.com/5-ton-rheem-gas-electric-package-unit-3ph-230v-13-7-seer2-100k-btu-commercial/feed/ 0 https://jamesnewtonmechanical.com/daikin-dfg0363dh00001s-3-ton-gas-electric-commercial-combi-furnace-ac-unit/ https://jamesnewtonmechanical.com/daikin-dfg0363dh00001s-3-ton-gas-electric-commercial-combi-furnace-ac-unit/#comments Wed, 04 Feb 2026 15:52:42 +0000 https://jamesnewtonmechanical.com/daikin-dfg0363dh00001s-3-ton-gas-electric-commercial-combi-furnace-ac-unit/ Read More]]>




Daikin DFG0363DH00001S 3 Ton Gas / Electric Commercial Combi Furnace / AC Unit. Brand New in Open Box – see images. We are not knowledgeable about this particular product. Therefore, we cannot offer any advice or guidance regarding installation, specification, or detail beyond what is readily available within this listing. Lot RN – HVAC Storage.

]]> https://jamesnewtonmechanical.com/daikin-dfg0363dh00001s-3-ton-gas-electric-commercial-combi-furnace-ac-unit/feed/ 0 https://jamesnewtonmechanical.com/3-ton-convertible-gaselectric-package-unit-13-seer-460603-commercial/ https://jamesnewtonmechanical.com/3-ton-convertible-gaselectric-package-unit-13-seer-460603-commercial/#comments Fri, 03 Oct 2025 09:09:41 +0000 https://jamesnewtonmechanical.com/3-ton-convertible-gaselectric-package-unit-13-seer-460603-commercial/ Read More]]>









{description} Terms & Conditions 2015 Federal Regional Standards for Heating and Cooling Products. I acknowledge that I have read and accept the foregoing terms. We only sell excess and liquidated items. 3 Ton Convertible Gas/Electric Package Unit, 13 Seer 460/60/3 Commercial. 3 Ton Gas/Electric Packaged Unit, Airflow:Convertible, Voltage:460, Hertz:60, Phase:3, Refrigerant:R-410A, SEER:13, CFM:1200, AFUE:81, BTU Input:60,000, BTU Output:40,000, Dims:41″H 48″W 53D Weight:425 Lbs, Origin:USA, Refer To Policies/Terms & Conditions For 2015 Federal Regional Standards For 13 SEER Heating And Cooling Products. Terms & Conditions 2015 Federal Regional Standards for Heating and Cooling Products. Sorry, our items are NOT available for pick-up. No additional information at this time. You might also like. US MOTORS 6650RS 1HP RESCUE SELECT DIRECT DRIVE BLOWER MOTOR 1050/VARIABLE SPEED. Rheem RCF3621HTAVUA 3 Ton Upflow High Efficiency Uncased A Coil 182497- Evaporat. THERM-O-DISC 3F05-1 ADJUSTABLE SNAP DISC FAN LIMIT CONTROL 90 deg F-130 deg F. CLIMATEMASTER 57B0021N01 1 1/2 Inch FLANGE KIT FOR UPS32-40 GRUNDFOS PUMPS 18374.

]]> https://jamesnewtonmechanical.com/3-ton-convertible-gaselectric-package-unit-13-seer-460603-commercial/feed/ 0 https://jamesnewtonmechanical.com/daikin-6-ton-gaselectric-packaged-unit-light-commercial-115000-btu-208230v-3ph/ https://jamesnewtonmechanical.com/daikin-6-ton-gaselectric-packaged-unit-light-commercial-115000-btu-208230v-3ph/#comments Mon, 05 Aug 2024 06:15:22 +0000 https://jamesnewtonmechanical.com/daikin-6-ton-gaselectric-packaged-unit-light-commercial-115000-btu-208230v-3ph/ Read More]]>



This Daikin 6 Ton Gas/Electric Packaged Unit is perfect for light commercial applications. The unit features a multi-speed ECM blower motor and a 3-phase power source. The outdoor unit is corded electric and gas, with a voltage of 208/230 V. Please note that this product and many products we list may contain a chemical known to the state of California to cause cancer or birth defects or other reproductive harm. To avoid added charges, we recommend that you wait to schedule any installations or replacements until you have received your product. Report any damage or discrepancies within 24 hours by contacting our customer service department. “Clear” if all items are received undamaged and in full. “Short” if items are missing, noting specifics on the receipt. At American Direct Supply, we strive to deliver high-quality products in excellent condition to your residence. The product must not have been installed. Non-Returnable Items: Please note that items marked as Scratch and Dent, Clearance, or Overstock are not eligible for return. At American Direct Supply, we understand that HVAC system failures can happen unexpectedly. THEY WILL ISSUE YOU A CERTIFICATE OF REGISTRATION. For most units, a licensed professional must fully install or inspect the equipment, including initial start-up. Following completion of the first start-up, the professional will issue a dated installation invoice detailing the models and serial numbers of the equipment.

]]> https://jamesnewtonmechanical.com/daikin-6-ton-gaselectric-packaged-unit-light-commercial-115000-btu-208230v-3ph/feed/ 0 https://jamesnewtonmechanical.com/rheem-rknl-b073dl15e-6-ton-commercial-classic-2stage-gaselectric-packaged-unit/ https://jamesnewtonmechanical.com/rheem-rknl-b073dl15e-6-ton-commercial-classic-2stage-gaselectric-packaged-unit/#comments Mon, 21 Jun 2021 04:07:20 +0000 http://jamesnewtonmechanical.com/rheem-rknl-b073dl15e-6-ton-commercial-classic-2stage-gaselectric-packaged-unit/ Read More]]>







RHEEM 6 TON “COMMERCIAL CLASSIC” 2 STAGE GAS/ELECTRIC CONVERTIBLE PACKAGED UNIT, 11.2 EER, 81% 460/60/3 R-410A. 6 TON “COMMERCIAL CLASSIC” 2 STAGE GAS/ELECTRIC CONVERTIBLE PACKAGED UNIT, VOLTS:460, HERTZ:60, PHASE:3, EER:11.2, AIRFLOW:CONVERTIBLE, REFRIGERANT:R-410A, DESIGN PRESSURE HIGH/LOW:550 PSIG/250 PSIG, EFFICIENCY:81%, COOLING BTU’S:72,000, HEATING INPUT BTU’S:1ST STAGE/2ND STAGE:75,000/150,000, HEATING OUTPUT BTU’S:1ST STAGE/2ND STAGE:60,750/121,500, SUPPLY DIMS:23″ X 25″, RETURN DIMS:34″ X 14″, DIMS:44 1/4″H X 92 1/4″W X 58D, WEIGHT:900 LBS, IN BULK, MADE IN USA. (RUUD LABEL ON FRONT OF UNIT). Worlds Largest Distributor of Excess Air Conditioning, Heating and Refrigeration Items. If You Do Not See a Component or Item that You Need in the Section Above, then it is Not Included in this Listing. This Listing Includes Everything You See Above. PLEASE GIVE US TIME TO CONTACT A TRUCKING COMPANY FOR YOU AND THEN YOU WILL RECEIVE A REVISED INVOICE ONCE THOSE CHARGES HAVE BEEN FIGURED. Although Rare, Minor Dings and Scratches can Happen but will Not Harm the Operation of the Equipment. Do NOT Sign for Items That Have NOT Been Inspected as once the Bill of Lading is Signed, You Will Own it and Remove Most or All of the Carrier’s Liability Even if the Signature is from Someone Else that Received it on Your Behalf. We know times are tough and we are willing to work with you. Most problems can be worked out if we just communicate. 2015 Federal Regional Standards for Heating and Cooling Products. I acknowledge that I have read and accept the foregoing terms. We only sell excess and liquidated items. Warning:Cancer and Reproductive Harm. The item “RHEEM RKNL-B073DL15E 6 TON COMMERCIAL CLASSIC 2STAGE GAS/ELECTRIC PACKAGED UNIT” is in sale since Tuesday, August 6, 2019. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC Systems\Central Air Conditioners”. The seller is “surpluscityliquidators” and is located in Lebanon, Indiana. This item can be shipped to United States.

• Brand: RHEEM
• MPN: RKNL-B073DL15E

]]> https://jamesnewtonmechanical.com/rheem-rknl-b073dl15e-6-ton-commercial-classic-2stage-gaselectric-packaged-unit/feed/ 0 https://jamesnewtonmechanical.com/ysc060g4rmb040-5-ton-light-commercial-gaselectric-package-unit/ https://jamesnewtonmechanical.com/ysc060g4rmb040-5-ton-light-commercial-gaselectric-package-unit/#comments Fri, 30 Apr 2021 11:29:45 +0000 http://jamesnewtonmechanical.com/ysc060g4rmb040-5-ton-light-commercial-gaselectric-package-unit/ Read More]]>






See the Manufaturers’s product catalog for Specific Information. NEW Gas Package Unit. 460 Volt /3 PHASE / 18Kw heat. The item “YSC060G4RMB040 5 Ton Light Commercial Gas/Electric Package unit” is in sale since Monday, August 24, 2020. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC Systems\Central Air Conditioners”. The seller is “volsupply” and is located in Knoxville, Tennessee. This item can be shipped to United States.

• Model: YSC060G4RMB00040
• Item Height: 36.25
• Item Depth: 69.87
• Item Width: 44.25
• Power Phase: 3 Phase
• System Configuration: Downflow
• Power Source: Gas
• Type: Central Air Conditioner
• Refrigerant: R-410a
• Tonnage: 5-5.9 tons
• Number of Fan Motors: 1
• Brand: Trane
• Compressor Type: Hermetic
• Number of Compressors: 1
• Voltage: 460 V

]]> https://jamesnewtonmechanical.com/ysc060g4rmb040-5-ton-light-commercial-gaselectric-package-unit/feed/ 0 https://jamesnewtonmechanical.com/rosinbomb-m-60-commercial-electric-rosin-press-6-ton-rosin-tech-heat-press/ https://jamesnewtonmechanical.com/rosinbomb-m-60-commercial-electric-rosin-press-6-ton-rosin-tech-heat-press/#comments Wed, 27 Jan 2021 15:31:13 +0000 http://jamesnewtonmechanical.com/rosinbomb-m-60-commercial-electric-rosin-press-6-ton-rosin-tech-heat-press/ Read More]]>








Rosinbomb M60 Commercial Electric Rosin Press with Flow Channel Technology 2019. The Rosinbomb m60 is the DADDY OF panini pressES OF ROSIN TECH PLEASE SEE YOUTUBE VIDEO. Topelectronicsdirect brings you the latest in the Rosinbomb family, the M60. This new and improved rosin press is packed with an abundance of technology which has been created to make pressing your flowers into waxy concentrates, hassle free, simple and easy with the ability to also achieve the maximum yield possible from your plant. The M60 uses Rosinbomb’s fantastic patent-pending Flow Channel Technology to help make the pressing process as simple as possible for you whilst still achieving maximum yield. The M60 navigates the concentrates into a custom-designed tray to allow for easy, time-saving collection. You can continuously press without having to pause between cycles and with an average yield of 15 to 30% and the ability to complete roughly 30 pressings in an hour, that would give you around 90 grams of rosin making the M60 also very efficient, especially as it delivers such high pressure whilst only using minimal electric. One of the key features of the Rosinbomb M60 is that it produces completely solventless rosin, meaning you get chemical-free, pure, organic produce which also gives you the best possible flavour and a more enjoyable experience. The M60 delivers 6000lb of force and can press up to 15 grams per press and because it is electric powered, there is no need for noisy, high maintenance hydraulics, hand cranks or electric pumps meaning you can enjoy a quieter, smoother, cleaner and more efficient press operation. Not only is the Rosinbomb M60, a high performance, low maintenance, tech-filled machine which makes light work of producing rosin, it also has a sleek and stylish design which would look trendy in any setting. Rosinbomb are passionate about delivering the finest products, their company started as a family business and can be traced back decades to innovative creations of machinery. They always strive to improve on their products, making them user-friendly but also to allow people to get the most out of them, the maximum yield, the best possible experience. Committed to quality, value and innovation, it is no surprise that they are a leader in the extraction industry, setting the trends within the industry. What’s new with the Rosinbomb M60? What is Flow Channel Technology? Flow Channel Technology directs the flow of oil into a custom-designed, silicon tray for easy collection. This allows you to churn & process material consecutively without the need to clean in between each cycle. In short, the Flow Channel Technology allows you to press over and over again without the need for cleanup and scraping in between, saving you time while increasing your yields at the same time. Height: 18 inches Width: 9 inches Depth: 9 inches Pressure: 6,000lb Grams per press: Up to 15 grams Temperature Range: Ambient temp – 300°F (149°C) Weight: 15.6kg (35lb) Plug Type: UK. Powered by a patent pending power source – Solventless yields – 1 minute set up – Adjustable precision temperature control on both top and bottom plates – Simple to use – Up to 15 grams material per press – 6,000lb of pressure – FDA approved, food-grade, diamond-hard coating – Quieter, smoother, electric powered operation – Manufactured in the USA – Compact, easy to store size – Powder-coated, aircraft grade aluminium plates. In the M60 box we will include a Bombloader, which is sized to the bag size appropriate to the M60, a specially-designed M60 Cleaning Tool, Silicon Rosin Collection Tray, a package of (12 Bags) M Series Flower Bags and a Mavstix. The item “RosinBomb M-60 Commercial Electric Rosin Press 6 Ton, Rosin Tech Heat Press” is in sale since Tuesday, October 15, 2019. This item is in the category “Business, Office & Industrial\Printing & Graphic Arts\Heat Presses”. The seller is “topelectronicsdirect_co_uk” and is located in Erith. This item can be shipped worldwide.

• Featured Refinements: Rosin Press
• MPN: Does Not Apply
• Country/Region of Manufacture: United States
• Material: Metal
• Brand: ROSINBOMB, Rosin tech, ROSINBOMB Rocket, RTP
• Voltage: 220 V

]]> https://jamesnewtonmechanical.com/rosinbomb-m-60-commercial-electric-rosin-press-6-ton-rosin-tech-heat-press/feed/ 0 https://jamesnewtonmechanical.com/new-50-ton-iroquois-electric-hydraulic-heavy-duty-commercial-shop-press-usa-made/ https://jamesnewtonmechanical.com/new-50-ton-iroquois-electric-hydraulic-heavy-duty-commercial-shop-press-usa-made/#comments Wed, 21 Oct 2020 09:48:36 +0000 http://jamesnewtonmechanical.com/new-50-ton-iroquois-electric-hydraulic-heavy-duty-commercial-shop-press-usa-made/ Read More]]>




New 50 Ton Iroquois Electric Hydraulic HEAVY DUTY Commercial Shop Press USA Made. Full After Sales Support. 100% Safe & Secure. Iroquois’ HP50 Commercial Duty Press has a fully welded, heavy duty frame. The press has a two speed pump for fast cycle times. We offer full customization including open widths, open heights and cycle speeds. There are many options available. 50 Ton’H’ Frame Style Press. 32 Wide Press Bed. 44 Standard open height. Two Stage Hydraulic Pump for fast approach & retract. 1.5 Horsepower, 120 Volt (other pump sizes/voltages also available). 20′ Cord & Nema 5-20 Plug. Overall Dimensions: 42.25″W x 34″D x 83.25 H. Comes with Press Blocks & Press Ram Cap. Long ago, bending metal was a grueling task. Today, without the proper equipment, it can still be painstaking, frustrating, even maddening. We think you want better Like a modern high-tech machine thats not only affordable, but is mostly hassle-free, highly accurate, and durable. And dependable partners you can rely on like a team of Iditarod Huskies always at the ready to pull you through the heavy chores. That was our philosophy when we started Iroquois Ironworks in 2003. Its been our driving objective every day since. You have things to build and your time is valuable. Our mission is to help you craft your products and meet your deadlines with hydraulic press brake equipment that performs flawlessly day in, day out. Its not our goal to be the biggest. What our entire staff is happy with are satisfied customers building superior products using our hefty reliable Iroquois machines. After all, when you really enjoy your work, life is good. Thats how we feel, and you should too. Were proud to have our fabricating equipment humming away all across the country and we hope youll find out for yourself how good youll feel when your Iroquois Ironworks team treats you like the dependable partner you deserve. Incorporated in 2003, Iroquois Ironworker, Inc. Is a well established American manufacturing company that is founded upon Christian principle and integrity. We are located in Iroquois, SD, USA. How can I pay for my order? Please contact Iroquois Ironworker, Inc. For bank information if sending a wire transfer. We strive on providing the best possible experience while shopping with us. Add to Favorites. Listing and template services provided by inkFrog. The item “New 50 Ton Iroquois Electric Hydraulic HEAVY DUTY Commercial Shop Press USA Made” is in sale since Thursday, March 19, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Other CNC, Metalworking & Manufacturing”. The seller is “iroquois_ironworker” and is located in Iroquois, South Dakota. This item can be shipped to United States.

• Brand: Iroquois
• MPN: Does Not Apply

]]> https://jamesnewtonmechanical.com/new-50-ton-iroquois-electric-hydraulic-heavy-duty-commercial-shop-press-usa-made/feed/ 0 https://jamesnewtonmechanical.com/new-50-ton-iroquois-electric-hydraulic-commercial-shop-14-ton-press-usa-made/ https://jamesnewtonmechanical.com/new-50-ton-iroquois-electric-hydraulic-commercial-shop-14-ton-press-usa-made/#comments Mon, 20 Jul 2020 09:18:01 +0000 http://jamesnewtonmechanical.com/new-50-ton-iroquois-electric-hydraulic-commercial-shop-14-ton-press-usa-made/ Read More]]>





New 50 Ton Iroquois Electric Hydraulic Commercial Shop 14 Ton Press USA Made. Full After Sales Support. 100% Safe & Secure. Iroquois’ HP50 Commercial Duty Press with optional 14 Ton side press has a fully welded, heavy duty frame. The side press option gives you the ability to do your more delicate work with higher speed and better visibility. The press has a two speed pump for fast cycle times. We offer full customization including open widths, open heights and cycle speeds. There are many options available. H’ Frame Press with optional 14 Ton’C’ Style Side Press. Two Stage Hydraulic Pump for fast approach & retract. 1.5 Horsepower, 120 Volt (other pump sizes/voltages also available). Overall Dimensions: 55″W x 36″D x 87 H. Comes with Press Blocks & Press Ram Cap. 50 Ton’H’ Frame Style Press. 32 Wide Press Bed. 44 Standard open height. 14 Ton’C’ Frame Style Press. Long ago, bending metal was a grueling task. Today, without the proper equipment, it can still be painstaking, frustrating, even maddening. We think you want better Like a modern high-tech machine thats not only affordable, but is mostly hassle-free, highly accurate, and durable. And dependable partners you can rely on like a team of Iditarod Huskies always at the ready to pull you through the heavy chores. That was our philosophy when we started Iroquois Ironworks in 2003. Its been our driving objective every day since. You have things to build and your time is valuable. Our mission is to help you craft your products and meet your deadlines with hydraulic press brake equipment that performs flawlessly day in, day out. Its not our goal to be the biggest. What our entire staff is happy with are satisfied customers building superior products using our hefty reliable Iroquois machines. After all, when you really enjoy your work, life is good. Thats how we feel, and you should too. Were proud to have our fabricating equipment humming away all across the country and we hope youll find out for yourself how good youll feel when your Iroquois Ironworks team treats you like the dependable partner you deserve. Incorporated in 2003, Iroquois Ironworker, Inc. Is a well established American manufacturing company that is founded upon Christian principle and integrity. We are located in Iroquois, SD, USA. How can I pay for my order? Please contact Iroquois Ironworker, Inc. For bank information if sending a wire transfer. We strive on providing the best possible experience while shopping with us. Add to Favorites. Listing and template services provided by inkFrog. The item “New 50 Ton Iroquois Electric Hydraulic Commercial Shop 14 Ton Press USA Made” is in sale since Thursday, March 19, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Other CNC, Metalworking & Manufacturing”. The seller is “iroquois_ironworker” and is located in Iroquois, South Dakota. This item can be shipped to United States.

• Brand: Iroquois
• MPN: Does Not Apply
• Country/Region of Manufacture: United States

]]> https://jamesnewtonmechanical.com/new-50-ton-iroquois-electric-hydraulic-commercial-shop-14-ton-press-usa-made/feed/ 0 https://jamesnewtonmechanical.com/trane-commercial-central-air-conditioner-5-ton-air-handler-twe060/ https://jamesnewtonmechanical.com/trane-commercial-central-air-conditioner-5-ton-air-handler-twe060/#comments Sun, 12 Jul 2020 00:19:43 +0000 http://jamesnewtonmechanical.com/trane-commercial-central-air-conditioner-5-ton-air-handler-twe060/ Read More]]>




TRANE Commercial Central Air Conditioner 5 Ton Air Handler TWE060. We have 5 of these. The item “TRANE Commercial Central Air Conditioner 5 Ton Air Handler TWE060″ is in sale since Monday, May 4, 2020. This item is in the category “Business & Industrial\Building Materials & Supplies\Other Building Materials”. The seller is “ugakales16″ and is located in Austell, Georgia. This item can’t be shipped, the buyer must pick up the item.

• Brand: TRANE
• MPN: Does Not Apply

]]> https://jamesnewtonmechanical.com/trane-commercial-central-air-conditioner-5-ton-air-handler-twe060/feed/ 0