https://jamesnewtonmechanical.com Mon, 25 May 2026 18:58:41 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://jamesnewtonmechanical.com/3ton-sanitary-centrifugal-pump-lift-52ft-corrosion-resistant-material-transfer/ https://jamesnewtonmechanical.com/3ton-sanitary-centrifugal-pump-lift-52ft-corrosion-resistant-material-transfer/#comments Sat, 15 Feb 2025 08:13:47 +0000 https://jamesnewtonmechanical.com/3ton-sanitary-centrifugal-pump-lift-52ft-corrosion-resistant-material-transfer/ Read More]]>



















316 Stainless steel Sanitary centrifugal pump. Stainless steel centrifugal pump is specificalized for all the products which are related to food, such as dairy products, beverages, food, cosmetics, food additives, fine chemicals. The centrifugal pump applies centrifugal force to produce speed, using a rotating impeller to increase the speed and push the fluid through the outlet valve. Lift of a pump. Inlet pipe diameter(external diameter). 1.49IN(3.8CM). Outlet pipe diameter(external diameter). 1.26IN(3.2CM). This Centrifugal Pump uses new design machine seal which will not contact the materials. Adopts high efficient and powerful motor, 316 Stainless Steel. Heavy duty of 3 Tons / hour. The clamp is flexibly connected with avariety of inlet and outlet options. Selected stainless steel, durable, customerscan replace different interfaces (we are standard interface). High quality bearings have a longer service life, higher accuracy, lower noise, higher rotational speed, and are less prone to overheating compared to similar bearings, with high cost-effectiveness. Fine sealing ring, better sealing performance, and relatively longer service life. Corrosion resistance, pressure resistance, and relatively resistant to deformation. Do not switch on the pump when it is empty. It will be easily damaged if the pump is operating with no liquid for a little while. Please be sure that there is enough liquid in the pump before you switch on! Do not use this pump with paste or sticky liquid, such as butter, Peanut butter, honey and syrup etc. Do not use this pump with liquid of strong acid and alkali. Do not use this pump with high proof spirits or alcohol. The installation foundation of the pump shall generally be a flat ground with sufficient strength, which shall be installed at the lowest position of the equipment as far as possible, that is, the position with the maximum lift height. Do not idle the machine to prevent burning the motor. Lifting height will affect the flow of the pump outlet, it is recommended that customers in the use of the pump, the outlet is best to install additional valves to control the water flow, so as not to overload to burn the machine.

]]> https://jamesnewtonmechanical.com/3ton-sanitary-centrifugal-pump-lift-52ft-corrosion-resistant-material-transfer/feed/ 0 https://jamesnewtonmechanical.com/12v-3ton-3-in-1-electric-hydraulic-floor-jack-lift-suv-truck-car-withimpact-wrench/ https://jamesnewtonmechanical.com/12v-3ton-3-in-1-electric-hydraulic-floor-jack-lift-suv-truck-car-withimpact-wrench/#comments Mon, 17 Oct 2022 10:26:48 +0000 https://jamesnewtonmechanical.com/12v-3ton-3-in-1-electric-hydraulic-floor-jack-lift-suv-truck-car-withimpact-wrench/ Read More]]>













The working capacity of the jack can reach up to 3.0T/6600 lbs. It is equipped with a 12V vehicle power outlet and a low-pressure pull rod, which is very suitable for sports cars. In addition, the jack is equipped with a dual-motor drive that can work independently. WIDE LIFTING HEIGHT RANGE? It can be adjusted easily with a wide lifting height range. Lowest height: 155 mm. Highest height: 450 mm. Lift the car easily within one minute to help you more quickly. It is equipped with a non-slip cross groove. The panel is easy to understand and operate. First adjust the mode to the lift mode, then press the button (up), you can easily ascend it. And the pressure gauge makes it convenient for you to check the inflation pressure while using the inflatable model. This product is multifunctional and can be used as a car jack, an air pump, or a LED flashlight. Equipped with a complete set of accessories, it can meet your various needs and help you deal with multiple emergencies on the road. A car electric jack, safety hammer, 3.5m cable, battery clamp with wire, gloves, and manual are included. All products are placed in a box that is convenient for you to carry and use. Working capacity: 3.0T/6600 lbs. A 12V vehicle power outlet and a low-pressure pull rod are set for sports cars. A dual-motor drive, which can work independently. Non-Slip Cross Recessed Ejector. This is a solid and stable non-slip ejector, free to adjust the height and starting height effortlessly, but also to stabilize the vehicle, to ensure your security and efficiency. Adjust the mode to the lift mode, press the button (up), you can easily rise it, and the pressure gauge is convenient for viewing the inflation pressure. It can function as a car jack, an air pump, and a LED flashlight. It matches the complete small tools, safety hammer, gloves, BMC packing, engineering ABS shell. Emergency safety valve to avoid jack in case of loss of power fall, the jack automatically stops working after reaching the height limit. All products Car electric jack, safety hammer, 3.5m cable. Battery clamp with wire, gloves, BMC packing, engineering ABS shell are placed in the box. 12V DC 3T Automatic Car Jack. This tool kit is of succinct and compact design, easy to go with an attached plastic box for easy transport and storage. The jack, pump, and wrench are capable of multiple demands. They form an essential and practical toolset for outdoor emergencies. Also, the structure is safe and stable. LED lamp on jack can be used as a flashlight. Jack Capacity: 3.0T/6600LB. Lifting Height Range: 155MM-450MM. 3 In 1 Function. Loading Car Weight: 6600 lbs (3 Ton). Lifting Range: 6.1″-17.7″ (155-450 mm). Pressure: 10 bar (150 psi). Air Flow: 9.2 gal/min (35 L/min). Air Hose Length: 25.6 (0.65m). Power Cable: 11.5′ (3.5m). 1 X Combo 2 in 1 6600 LBS/3 Ton Electric Hydraulic Jack. 1 X Electric Impact Wrench. 1 X 11.5′ (3.5m) Power Cable. 1 X Battery Clamp Connecting Cable. 2 X Double-sided Lug Nut Sockets: 23 mm (7/8″), 21 mm (13/16″), 19 mm (3/4″), 17 mm (11/16″). 1 X Socket Adapter. 2 X Spare Fuses (15A). 1 X Safety Hammer. 1 X Pair of Gloves. 1 X Plastic Case. 1 X Instruction Manual. 3 ton Scissor Jack White. 3 ton Scissor Jack Yellow. 3 ton Scissor Jack+Wrench. 3 ton Scissor Jack+Wrench+Pump. (SUV)6.7-16.5 inch / 17-42 cm (Sedan)4.7-14.6 inch / 12-37 cm. 4.7″-17.7″ /12-45 cm. 6.1″-17.71″/15.5-45 cm. (SUV)6.7-16.5 inch / 17-42 cm (Sedan)4.7-14.6 inch / 12.5-37 cm. 5 ton Electric-Hydraulic Jack. 3 ton Electric-Hydraulic Jack+Wrench. 5 ton Electric-Hydraulic Jack+Wrench. 5 ton Electric Display Jack+Wrench. 5.3″-14.2″ /13.5-36 cm. 6.1″-17.7″ /15.5-45 cm. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours. This item is in the category “eBay Motors\Automotive Tools & Supplies\Shop Equipment & Supplies\Jacks & Jack Stands”. The seller is “dgr4hjr_jdhqf-4″ and is located in this country: US. This item can be shipped to United States, Canada, Germany.

• Type: Floor Jack
• Brand: VEVOR
• Manufacturer Part Number: XZGC50041341509086028
• Material: Metal and Plastic
• Set or Single Item: Set
• Capacity per Stand: 3T / 6600LBS
• Vehicle Type: ATV,Heavy Duty/Commercial
• Number of Pieces: 1
• Drive: Electrical
• Minimum Height: 6.1”(155mm)
• Maximum Lift Height: 17.71 inch(450mm)
• Rated Power: 80W
• Operating Voltage: DC12V
• Max. Current: 13A
• Max. Pressure: 10 bar (150 psi)
• Air Flow: 9.2 gal/min (35 L/min)
• Current: 10A
• Air Hose Length: 0.65m
• Power Cable: 3.5m
• Max. Torque: 480 N.m
• Kit Gross Weight: 21.9 lbs (9.9 kg)
• UPC: 827843148016

]]> https://jamesnewtonmechanical.com/12v-3ton-3-in-1-electric-hydraulic-floor-jack-lift-suv-truck-car-withimpact-wrench/feed/ 0 https://jamesnewtonmechanical.com/3ton-12v-dc-electric-lifting-car-suv-emergency-equipment/ https://jamesnewtonmechanical.com/3ton-12v-dc-electric-lifting-car-suv-emergency-equipment/#comments Fri, 05 Nov 2021 19:31:45 +0000 http://jamesnewtonmechanical.com/3ton-12v-dc-electric-lifting-car-suv-emergency-equipment/ Read More]]>













3Ton 12V DC Electric Jack Lifting Car SUV Emergency Equipment. Compact size equipment stores in car for emergent roadside tire change and repair. 12.5cm to 36cm. Push button controller with long enough line, plugs into car. Comes with controller, crank handle, impact wrench, screwdriver, fuses, a pair of gloves, etc for much convenience. Packaged in plastic storage case for easy transportation and storage. Material: Metal, Plastic Working voltage. 12-35cm / 4.72” x 13.77′. 39.5 x 16cm / 15.6” x 6.3” Impact wrench length: Approx. 8.66” Screwdriver length: Approx. 19.5cm / 7.68” Small socket size: 17mm 19mm Big socket size: 21mm 23mm Package Weight: Approx. 1 x Car Electric with Controller. 1 x Crank Handle. 1 x Impact Wrench. 1 x Battery Wire with Clamps. 2 x Socket Adapters. 1 x Car Head (Lifting range: 12.5-36cm). 1 x SUV Head (Lifting range: 17-42cm). 1 x Pair of Gloves. This product must be powered by automobile batteries. If other products are used, it will affect the use of the product. When tightening the screw with a wrench, please stop it when you hear the sound of 4 times. At this time, the of the wrench has reached 480N. Otherwise, the internal parts will be damaged. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “3Ton 12V DC Electric Lifting Car SUV Emergency Equipment” is in sale since Tuesday, September 8, 2020. This item is in the category “eBay Motors\Automotive Tools & Supplies\Shop Equipment & Supplies\Jacks & Jack Stands”. The seller is “super_deal321″ and is located in California. This item can be shipped to United States.

• Impact wrench length: Approx. 8.66”
• Screwdriver length: Approx. 19.5cm / 7.68”
• Manufacturer Part Number: Does Not Apply
• Material: Metal, Plastic
• Brand: Unbranded
• Jack size: Approx. 39.5 x 16cm / 15.6” x 6.3”
• Big socket size: 21mm 23mm
• Type: Car Electric Jack
• Small socket size: 17mm 19mm
• Maximum Capacity: 3 Ton
• Lifting range: Approx. 12-35cm / 4.72” x 13.77”
• Package Weight: Approx. 8.58kg
• Country/Region of Manufacture: China
• Working voltage: 12V
• Warranty: 6 Month
• Number of Pieces: 14
• Vehicle Type: Heavy Duty/Commercial
• Maximum Lift Height: 42cm
• ISBN: Does not apply
• Capacity per Stand: 3 Ton
• Drive: Electrical
• Set or Single Item: Set
• Minimum Height: 17cm

]]> https://jamesnewtonmechanical.com/3ton-12v-dc-electric-lifting-car-suv-emergency-equipment/feed/ 0 https://jamesnewtonmechanical.com/3ton-chain-lever-block-hoist-come-along-puller-ratchet-type-lift-10ft-6600lbs/ https://jamesnewtonmechanical.com/3ton-chain-lever-block-hoist-come-along-puller-ratchet-type-lift-10ft-6600lbs/#comments Tue, 19 Oct 2021 16:35:39 +0000 http://jamesnewtonmechanical.com/3ton-chain-lever-block-hoist-come-along-puller-ratchet-type-lift-10ft-6600lbs/ Read More]]>













DURABLE CONSTRUCTION & 3T- Made of carbon steel with strong hardness, anti-impact and anti-oxidation, especially the safe hook has safety latch and can rotate 360° without any limitation which is easy to operate. HUMANIZATION DESIGN- Simple structure, small size and easy to carry. Also, its handle has non-slip rubber material cover with special texture, it is ergonomic and makes this lever chain hoist more easy to be operated. GALVANIZED CHAIN 3M- With 3T lift capacity and 3m length, the chain has enough strong tension and intensity to cause deformation. Stainless steel hand chain has mighty resistance to corrosion and wear. HIGH QUALITY BRAKE- Premium brake makes it more stable and greatly ensure your safety during operation and helps prevent lift operation when load exceeds rated capacity for added safety and to avoid damage. WIDE APPLICATION- Because of stable load, it can be widely used in transport, construction, and other areas for lifting goods, and dragging loads, and also ideal for portable use in workshops, garages, factory. With its simple structure, small size and light weight which save more space, the mini chain hoist is easy to carry and use. Two Swivel Hooks & 3T. Safe hook is not only made of durable material, but has safety latch and can rotate 360°without any limitation which is easy to operate. Its handle has non-slip rubber material cover with special texture, it is ergonomic and makes this lever chain hoist more easy to be operated. Constructed with hardened alloy steel chain, 5/16 diameter chain thickness and 3m length, it has mighty resistance to corrosion and wear. Premium brake makes it more stable and greatly ensures your safety during operation. Constructed of brake, it is greatly improved security and reliability. It can be widely used to install machines, lifting goods, and dragging loads in construction site, electric power, truck transportation, factory, etc. 3T Manual Lever Chain Hoist 3M. As a kind of highly efficient and versatile hand operated lifting appliance. It works well at heights, in narrow working place, fields, and in doing various angles of pulling. It features lightweight, small volume and takes less strength to operate the handle. The insulating handle ensures you a comfortable grip. A really convenient and effective equipment. Chain Material: 20Mn2 alloy steel. Cover: Cold rolled steel. Max lift Height: 10ft/3m. Distance between Hooks: 1. Length of Lever Handle: 16. 1 X 6600lbs 10ft Chain Block. 1 X Puller Pulley. 2 X Swivel Eye Hooks with Latches. 3300lbs Lever Block 5ft Chain Hoist. 3300lbs Lever Block 10ft Chain Hoist. 3300lbs Lever Block 20ft Chain Hoist. 3T 6600lb Chain Hoist 5Ft. 6600lbs Lever Block 10ft Chain Hoist. 6000lbs Lever Block 20ft Chain Hoist. Safehook is not only made of durable material, but has safety latch and canrotate 360°without any limitation which is easy to operate. Itshandle has non-slip rubber material cover with special texture, it isergonomic and makes this lever chain hoist more easy to be operated. Constructedwith hardened alloy steel chain, 5/16 diameter chain thickness and 3m length, it has mighty resistance to corrosion and wear. Premiumbrake makes it more stable and greatly ensures your safety duringoperation. Constructed of brake, it is greatly improved security andreliability. Itcan be widely used to install machines, lifting goods, and draggingloads in construction site, electric power, truck transportation, factory, etc. CA & TX & NJ & GA & NC &OR WAREHOUSE. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. The item “3Ton Chain Lever Block Hoist Come Along Puller Ratchet Type Lift 10FT 6600LBS” is in sale since Wednesday, January 25, 2017. This item is in the category “Business & Industrial\Material Handling\Hoists, Winches & Rigging\Cranes & Hoists\Other Cranes & Hoists”. The seller is “happykisssoul” and is located in Perth Amboy, New Jersey. This item can be shipped to United States, all countries in Europe, Canada, Mexico.

• Brand: VEVOR
• MPN: QICXC005
• Max lift height: 10FT/3M
• Lift capacity: 6600lbs/3T
• Chain Length: 10FT/3M
• Chain material: 20Mn2 premium alloy steel, black oxide finish, heat treated
• Hook: Hardened, heat treated & forged steel. black oxide finish
• Gear: Heat treated, forged & milling carbon steel
• Cover: Cold rolled steel, yellow paint
• Chain diameter: 5/16″ /0.79cm
• Packing size: 21″x8″x8″
• Packing weight: 48.4lbs
• Color: Red and Black
• Chain: G80

]]> https://jamesnewtonmechanical.com/3ton-chain-lever-block-hoist-come-along-puller-ratchet-type-lift-10ft-6600lbs/feed/ 0 https://jamesnewtonmechanical.com/3ton-r-410a-14seer-heat-pump-condensing-unit-by-rheem/ https://jamesnewtonmechanical.com/3ton-r-410a-14seer-heat-pump-condensing-unit-by-rheem/#comments Mon, 14 Jun 2021 02:58:56 +0000 http://jamesnewtonmechanical.com/3ton-r-410a-14seer-heat-pump-condensing-unit-by-rheem/ Read More]]>



Are you looking for a different HVAC equipment size or type? If so, stop by our store to see our complete selection of equipment. For Monthly SPECIALS & Discounts check. All Items Are New From the Factory. Call For Availability Before Ordering. 3 – Ton 14 SEER R-410A. Heat Pump Unit Model. You are purchasing a brand NEW direct from the factory Heat Pump made by RHEEM These units are NOT a scratch or dent item or a discontinued model. As you learn more about this great product, which we are offering at an even more incredible price, we are confident that you will not find a better bargain than this. We have more than 30 years experience in the industry and because of this, we are able to offer you this quality equipment at these affordable prices. Thank you in advance for shopping with us. Rheem Manufacturing Company was established in the mid-1920s when brothers Richard and Donald Rheem acquired a galvanizing plant in San Francisco, California. In the 1930’s, Rheem began manufacturing water heaters, and by 1936 had coast to coast distribution. During the 1940s and 1950s, the company increased its product line to include space-heating units for homes, oil furnaces and air conditioners. In 1959, Rheem acquired Ruud Manufacturing Company, a pioneer in the water heating industry with a well-regarded product line and a distribution network throughout North America. In subsequent years, Rheem entered the heating and air conditioning market and expanded in the late 1960’s and 1970’s with the rapid growth of the central air conditioning industry. In 1985, the company acquired Raypak, a leading producer of copper tube boilers used for swimming pool heating and commercial hot water supply and hydronic heating. Rheem is the industry leader for total heating, cooling and water heating solutions. In fact, Rheem is one of the few global brands with product offerings covering residential and commercial heating, cooling, conventional storage-style water heaters, tankless water heaters, solar water heating systems, replacement parts and accessories for all categories making us a one-stop solutions provider. All Rheem heating, cooling and water heater heating products meet and exceed rigorous industry standards for quality and reliability. Rheem products are frequently tested and certified by various government and third-party testing labs to ensure quality standards. It is our policy to promote a culture of continual improvement that is committed to exceeding customer expectations and requirements, by providing products and services of excellent quality. New composite base pan dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed. Improved tubing design reduces vibration and stress, making unit quieter and reducing opportunity for leaks. Optimized defrost characteristics – decrease defrosting and provide better home comfort Powder coat paint system for a long lasting professional finish. Optimized reversing valve sizing improves shifting performance for quieter unit operation and increased life of the system. Enhanced mufflers help to dissipate vibration energy for quieter unit operation. Scroll compressor a sound abating feature added to the compressor significantly reduces noise when system transitions in and out of defrost mode. Modern cabinet aesthetics increased curb appeal with visually appealing design. Curved louver panels provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity. Optimized fan orifice optimizes airflow and reduces unit sound. Rust resistant screws confirmed through 1500-hour salt spray testing. PlusOne Expanded Valve Space 3″-4″-5 service valve space provides a minimum working area of 27-square inches for easier access. Integrated heat pump lift receptacle allows standard CPVC stands to be inserted into the base. PlusOne Triple Service Access 15 wide, industry leading corner service access makes repairs easier and faster. The two fastener removable corner allows optimal access to internal unit components. Individual louver panels come out once fastener is removed, for faster coil cleaning and easier cabinet reassembly. Diagnostic service window with two-fastener opening provides access to the TXV valves and the heat pump reversing valve before opening the unit. External gauge port access allows easy connection of low-loss gauge ports. Single-row condenser coil makes unit lighter and allows thorough coil cleaning to maintain out of the box performance. 35% fewer cabinet fasteners and fastener-free base allow for faster access to internal components and hassle-free panel removal. Service trays hold fasteners or caps during service calls. QR code provides technical information on demand for faster service calls. Fan motor harness with extra-long wires allows unit top to be removed without disconnecting fan wire. The reliable scroll compressor is the key to efficiency for this Rheem model. Its the latest in high-efficiency compressor technology. The advanced scroll compressor offers low noise and vibration characteristics and features tolerance to liquid refrigerant and system contamination. The scroll compressor also has low start torque, reducing start problems in the field. And its unique design enables air conditioners to perform efficiently and quietly. Heat Pump Technical Specifications. Compressors on all models. Copper tube / aluminum fin coil. EASY TO INSTALL AND SERVICE. Easy Access service valves on all models. External high and low refrigerant service ports. Only two screws to access control panel. Factory charged with R–410A refrigerant. Baked–on powder coat finish over galvanized steel. Post–painted (black) coil fins. Oated, weather–resistant cabinet screws. Grille for extra protection. Rated in accordance with ARI Standard 210/240. Certification applies only when used with proper components as listed with ARI. Applies to original purchaser/homeowner, some limitations may apply. Split HVAC systems and components are designed to be installed by qualified HVAC technicians. The installation of HVAC systems includes electrical, gas, and refrigerant connections, is generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. Further, the failure to properly install HVAC equipment can raise personal safety and performance concerns. As outlined, the failure to comply with this policy could lead to violations of applicable law that are punishable by fines. At Quality Air Equipment, your. Satisfaction is our goal. In an effort to achieve this goal, and to serve you better, we have included our store policies. Please take the time to read through them, doing so will ensure your order is processed quickly and correctly. Heres what we need to know. When the driver delivers your order, it is. Important that you visually inspect all your items. If the delivered item(s) look to be damaged in anyway please. Take possession of the item(s). If you are not sure that there is damage to any of the wrapped equipment, open it up and inspect it BEFORE you sign and accept possession. For only the item that is damaged. The buyers must securely pack the merchandise the same way they originally received it. Special order equipment, are NOT returnable except; If the equipment does not match the order OR the equipment is defective when picked-up or delivered. Labor is not covered under these warranties! While we acknowledge and applaud Do-It-Yourselfers, most of the equipment listed should be installed by persons who have the proper expertise, license, and certification to do so. In fact, Federal Law prohibits anyone from opening a refrigeration system unless they are licensed and certified. Additionally, having a licensed and certified installer that does the work will only help insure years of trouble free operation. WE ARE HERE TO HELP! At Quality Air Equipment, your complete satisfaction is our number one goal. The item “3Ton R-410A 14SEER Heat Pump Condensing Unit by Rheem” is in sale since Wednesday, March 3, 2021. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Central Heating & Cooling Systems\Central Air Conditioners”. The seller is “qualityairequipment” and is located in Richardson, Texas. This item can be shipped to United States.

• BTU Cooling Rating: 36,000
• Model: RP1436AJ1NA
• Size: 3 Ton
• SEER: 14
• Refrigerant: R410a
• Unit Type: Split System
• Cooling BTU/Hr: 36,000
• Power Source: Electric
• Type: Central Air Conditioner
• Features: Heat/Heat Pump
• MPN: Does Not Apply
• Brand: Rheem
• Number of Compressors: 1
• Voltage: 208/230 V

]]> https://jamesnewtonmechanical.com/3ton-r-410a-14seer-heat-pump-condensing-unit-by-rheem/feed/ 0 https://jamesnewtonmechanical.com/12v-3ton-car-jack-lift-electric-hydraulic-floor-jack-impact-wrench-tire-tool-kit/ https://jamesnewtonmechanical.com/12v-3ton-car-jack-lift-electric-hydraulic-floor-jack-impact-wrench-tire-tool-kit/#comments Wed, 19 May 2021 07:05:22 +0000 http://jamesnewtonmechanical.com/12v-3ton-car-jack-lift-electric-hydraulic-floor-jack-impact-wrench-tire-tool-kit/ Read More]]>













Electric car jack set is made of alloy steel, large base and saddle make this car jack strong and stable. Can be used for emergency roadside tire replacement and repair of cars and SUVs under 3T. All the electric jacks are equipped with a powerful, firm suitcase, which helps keeping the components and parts well organized, and conveniently fits in your vehicle. 3T/6600LB capacity, 12cm to 37cm lifting height and 17 to 42cm lifting height. Push button controller with long enough line, plugs into car 12 volt power outlet. Updated Version Provides Higher Stability and Safety: Our electric car jack Heavy-duty steel construction, large base and saddle make this car jack strong and stable. Contact suface and compact triangle design for extra stability, reinforced solid screw rod makes the electric car jack will not easily be torn apart or twisted. Due to the safety compact design, jack will automatically stop working when it reaches the height limitation. Best choice for Sedan and SUV(under 3T): Two removable raised heads are respectively designed for Sedan and SUV. Vehicles under 3 ton can be easily lifted, but DO NOT use it on the trucks and those beyond 3 ton. Two-way Power Supply: It can be connected to either a 12 V outlet or car battery, two connector choices make it a necessary car repair tool when run into roadside emergencies. Get Done in Minutes: It takes ONLY about 2 minutes to reach a maximum height (17in) with loading capacity as high as 3T; Electric Impact Wrench powerful latest and upgraded version removes the nuts by pressing the switch for about 5 seconds. Whether men or women can replace the tire with ease in any emergent case. Professional Double-Purpose Tool Box: The structure of the floor jack is succinct and easy to operate with a compact and organized storage box. Wrench rated power: 80W. Elevation height: 12.5cm-37cm, 17cm-42cm. 1X pair of gloves. 3X fuse (250V 15A). 1X3.5M power cord. 1X Jack Instruction Manual 1pcs. 1X jack (2 car heads; 1 hand grip). 1X battery clip connecting cable (electric frequency clip). 1X electric wrench (two-way sleeve: two 17mm/19MM and 21mm/23mm). We have warehouses in the USA. E-mails are answered Monday through Saturday. Please allow up to 48 hours for a response to your message 3. The item “12V 3Ton Car Jack Lift Electric Hydraulic Floor Jack Impact Wrench Tire Tool Kit” is in sale since Tuesday, January 26, 2021. This item is in the category “eBay Motors\Automotive Tools & Supplies\Shop Equipment & Supplies\Jacks & Jack Stands”. The seller is “squaremart” and is located in Bordentown, New Jersey. This item can be shipped to United States.

• Capacity: 3T/6600LB
• Material: alloy steel
• Manufacturer Part Number: Does Not Apply
• Brand: Ridgeyard
• Voltage: DC 12V
• Wrench current: 13A
• Jack power rating: 100W
• Wrench rated power: 80W
• Maximum torque: 480N.M
• Working current: <15A 75W
• Elevation height: 12.5cm-37cm, 17cm-42cm

]]> https://jamesnewtonmechanical.com/12v-3ton-car-jack-lift-electric-hydraulic-floor-jack-impact-wrench-tire-tool-kit/feed/ 0 https://jamesnewtonmechanical.com/3ton-automotive-electric-scissor-car-lift-dc-12v-wrench-12-impact-wrench/ https://jamesnewtonmechanical.com/3ton-automotive-electric-scissor-car-lift-dc-12v-wrench-12-impact-wrench/#comments Fri, 26 Feb 2021 11:23:21 +0000 http://jamesnewtonmechanical.com/3ton-automotive-electric-scissor-car-lift-dc-12v-wrench-12-impact-wrench/ Read More]]>













12V Automotive Electric Scissor Car Lifting Jack w/ Controller Impact Wrench US. Compact size equipment stores in car for emergent roadside tire change and repair. 3T capacity, 12.5cm to 36cm lifting height and 17 to 42cm lifting height. Push button controller with long enough line, plugs into car 12 volt power outlet. Comes with controller, crank handle, impact wrench, screwdriver, fuses, a pair of gloves, etc for much convenience. Packaged in plastic storage case for easy transportation and storage. 12-35cm / 4.72” x 13.77′. 17-42cm / 6.7” x 16.5′. 39.5 x 16cm / 15.6” x 6.3′. Impact wrench length: Approx. 19.5cm / 7.68′. 1 x Car Electric Jack with Controller. 1 x Crank Handle. 1 x Impact Wrench. 1 x Battery Wire with Clamps. 1 x Power Cable. 2 x Socket Adapters. 1 x Car Jack Head (Adjustable height: 12.5-36cm). 1 x SUV Jack Head (Adjustable height: 17-42cm). 1 x Pair of Gloves. This product must be powered by automobile batteries. If other products are used, it will affect the use of the product. When tightening the screw with a wrench, please stop it when you hear the sound of 4 times. At this time, the torque of the wrench has reached 480N. Otherwise, the internal parts will be damaged. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “3Ton Automotive Electric Scissor Car Lift DC 12V Wrench 1/2 Impact Wrench” is in sale since Tuesday, September 8, 2020. This item is in the category “eBay Motors\Automotive Tools & Supplies\Shop Equipment & Supplies\Jacks & Jack Stands”. The seller is “home_garden360″ and is located in California. This item can be shipped to United States.

• Brand: Unbranded
• Capacity: 3 Ton
• Drive: Electrical
• EAN: Does not apply
• ISBN: Does not apply
• Manufacturer Part Number: Does not apply
• Material: Metal
• Maximum Lift Height: 42cm
• Minimum Height: 17cm
• Number of Pieces: 14
• Set or Single Item: Set
• Type: Car Electric with Controller
• UPC: 736691408497
• Vehicle Type: Heavy Duty/Commercial
• Warranty: 6 Month
• Working Voltage: 12V

]]> https://jamesnewtonmechanical.com/3ton-automotive-electric-scissor-car-lift-dc-12v-wrench-12-impact-wrench/feed/ 0 https://jamesnewtonmechanical.com/12v-3ton-42cm-car-electric-floor-jack-lift-impact-wrench-for-suv-off-road-repair/ https://jamesnewtonmechanical.com/12v-3ton-42cm-car-electric-floor-jack-lift-impact-wrench-for-suv-off-road-repair/#comments Sat, 05 Dec 2020 02:30:54 +0000 http://jamesnewtonmechanical.com/12v-3ton-42cm-car-electric-floor-jack-lift-impact-wrench-for-suv-off-road-repair/ Read More]]>







You may also like. 12V 3Ton 42CM Car Electric Floor Jack Lift Impact Wrench For SUV off-road Repair. Use the car smoker power supply to directly take power. Super bright LED lighting function. Stroke self-locking protection function. Using high quality motor, super power. Through a number of certifications and tests by European and American authorities, the quality is guaranteed. Blow-molded box packaging, easy to carry, ideal for gifting relatives and friends. The 12V DC Automatic Electric Car Repair Tool Kit is worth having for emergency roadside tire change and repair. Cross groove saddle prevent slipping from vehicle. Rotating threaded rod can be spin out, makes cross groove saddle closer to lifting point. In case of the power has been disconnected, self-locking power structure and safety unloading knob prevent jack from falling and will not come down immediately. When re-connecting the power, jack will go on working in accordance with the instruction, or using the safety valve manually to fall. LED lamp on jack can be used as flashlight. Max Height:420mm(16.4). Min Height:170mm(6.6). Loading Car Weight:3T. Lifting range:170-420mm(6.6″-16.4″). 3Before any return, a. 1We are a professional automotive tools company, with own factory located in China. 2We are a professional authorized dealers of. Also offer reasonable prices , excellent customer service and a reliable credit standing are our target. 3 We own three warehouse in the world: China warehouse, United States warehouse, Germany warehous. Our normal working hours are from. All messages will be answered within 24 hours. You are welcome to write at any time! The item “12V 3Ton 42CM Car Electric Floor Jack Lift Impact Wrench For SUV off-road Repair” is in sale since Wednesday, June 24, 2020. This item is in the category “eBay Motors\Automotive Tools & Supplies\Shop Equipment & Supplies\Jacks & Jack Stands”. The seller is “obd-worldwide2019″ and is located in Shenzhen. This item can be shipped worldwide.

• Brand: Unbranded
• Manufacturer Part Number: Does Not Apply
• Type: Floor Jack + Impack Wrench
• Drive: Electrical
• Vehicle Type: Heavy Duty/Commercial
• Warranty: 3 Years
• Capacity: 7000lbs.
• Minimum Height: 170mm(6.6″)
• Maximum Lift Height: 420mm(16.4″)
• Rated power: 100W
• Operating Voltage: DC12V
• Max.current: 13A
• Feature: 12V DC 3T 42cm sedan SUV
• Material: Steel
• Set or Single Item: Set
• Number of Pieces: 2
• Country/Region of Manufacture: China

]]> https://jamesnewtonmechanical.com/12v-3ton-42cm-car-electric-floor-jack-lift-impact-wrench-for-suv-off-road-repair/feed/ 0 https://jamesnewtonmechanical.com/12v-3ton-heavy-duty-electric-scissor-car-lift-impact-wrench-dc-automotive/ https://jamesnewtonmechanical.com/12v-3ton-heavy-duty-electric-scissor-car-lift-impact-wrench-dc-automotive/#comments Mon, 16 Nov 2020 10:43:53 +0000 http://jamesnewtonmechanical.com/12v-3ton-heavy-duty-electric-scissor-car-lift-impact-wrench-dc-automotive/ Read More]]>













12V 3Ton Heavy Duty Electric Scissor Car Jack Lift Impact Wrench DC Automotive. Compact size equipment stores in car for emergent roadside tire change and repair. 3T maximum capacity, 12.5cm to 36cm lifting range and 17 to 42cm lifting. Push button controller with long enough line, plugs into car 12 volt power outlet. Comes with controller, crank handle, impact wrench, screwdriver, fuses, a pair of gloves, etc for much convenience. Packaged in plastic storage case for easy transportation and storage. Maximum Capacity: 3 Ton. 12-35cm / 4.72” x 13.77′. 39.5 x 16cm / 15.6” x 6.3′. Impact wrench length: Approx. 19.5cm / 7.68′. Small socket size: 17mm 19mm. Big socket size: 21mm 23mm. 1 x Car Electric Jack with Controller. 1 x Crank Handle. 1 x Impact Wrench. 1 x Battery Wire with Clamps. 1 x Power Cable. 2 x Socket Adapters. 1 x Car Jack Head (Lifting range: 12.5-36cm). 1 x SUV Jack Head. 1 x Pair of Gloves. This product must be powered by automobile batteries. If other products are used, it will affect the use of the product. When tightening the screw with a wrench, please stop it when you hear the sound of 4 times. At this time, the torque of the wrench has reached 480N. Otherwise, the internal parts will be damaged. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We are always happy to answer your questions or resolve any issues you might have with the item you order. Questions will be answered within 48 hours normally. There is time difference, so please give us a little more time to help you. Your feedback is critical to our success! The item “12V 3Ton Heavy Duty Electric Scissor Car Lift Impact Wrench DC Automotive” is in sale since Tuesday, August 13, 2019. This item is in the category “eBay Motors\Automotive Tools & Supplies\Shop Equipment & Supplies\Jacks & Jack Stands”. The seller is “februaryzhe” and is located in California. This item can be shipped to United States.

• Brand: Unbranded
• Capacity: 3 Ton
• Drive: Electrical
• ISBN: Does not apply
• Manufacturer Part Number: Does not apply
• Material: Metal
• Maximum Lift Height: 42cm
• Minimum Height: 17cm
• Number of Pieces: 14
• Set or Single Item: Set
• Type: Car Electric with Controller
• Vehicle Type: Heavy Duty/Commercial
• Warranty: 6 Month
• Working Voltage: 12V

]]> https://jamesnewtonmechanical.com/12v-3ton-heavy-duty-electric-scissor-car-lift-impact-wrench-dc-automotive/feed/ 0 https://jamesnewtonmechanical.com/3ton-14seer-mobile-home-electric-heating-system-condenserair-handler-with-coil/ https://jamesnewtonmechanical.com/3ton-14seer-mobile-home-electric-heating-system-condenserair-handler-with-coil/#comments Thu, 27 Aug 2020 23:45:30 +0000 http://jamesnewtonmechanical.com/3ton-14seer-mobile-home-electric-heating-system-condenserair-handler-with-coil/ Read More]]>








Because of the Currant Health Restrictions. Equipment Availability are Changing. Please, CALL before Ordering. Are you looking for a different HVAC equipment size or type? If so, stop by our store to see our complete selection of equipment. For Monthly SPECIALS & Discounts check. Call For Availability Before Ordering. All Items Are New From the Factory. Complete High Efficiency System. Including Electric Heater & Digital Thermostat. 3 – Ton 14 SEER R410A. Air Handler Model #. You are purchasing a brand NEW direct from the factory Complete Electric System Condensing Unit and AIR Handler made by RHEEM These units are NOT a scratch or dent item or a discontinued model. As you learn more about this great product, which we are offering at an even more incredible price, we are confident that you will not find a better bargain than this. We have more than 30 years experience in the industry and because of this, we are able to offer you this quality equipment at these affordable prices. Thank you in advance for shopping with us. Rheem Manufacturing Company was established in the mid-1920s when brothers Richard and Donald Rheem acquired a galvanizing plant in San Francisco, California. In the 1930’s, Rheem began manufacturing water heaters, and by 1936 had coast to coast distribution. During the 1940s and 1950s, the company increased its product line to include space-heating units for homes, oil furnaces and air conditioners. In 1959, Rheem acquired Ruud Manufacturing Company, a pioneer in the water heating industry with a well-regarded product line and a distribution network throughout North America. In subsequent years, Rheem entered the heating and air conditioning market and expanded in the late 1960’s and 1970’s with the rapid growth of the central air conditioning industry. In 1985, the company acquired Raypak, a leading producer of copper tube boilers used for swimming pool heating and commercial hot water supply and hydronic heating. Rheem is the industry leader for total heating, cooling and water heating solutions. In fact, Rheem is one of the few global brands with product offerings covering residential and commercial heating, cooling, conventional storage-style water heaters, tankless water heaters, solar water heating systems, replacement parts and accessories for all categories making us a one-stop solutions provider. All Rheem heating, cooling and water heater heating products meet and exceed rigorous industry standards for quality and reliability. Rheem products are frequently tested and certified by various government and third-party testing labs to ensure quality standards. It is our policy to promote a culture of continual improvement that is committed to exceeding customer expectations and requirements, by providing products and services of excellent quality. In the heat of summer your castle should be constantly cool, quiet, and comfortable. With efficient line of residential air conditioners at your disposal, you can keep discomfort locked away in the dungeon where it belongs. Designed for ground level or rooftop installations. These units offer comfort and dependability for single, multi-family and light commercial applications. 14 SEER/11.5EER Efficiency. Painted louvered steel cabinet. The sturdy, metal box, full metal jacket construction. Easily accessible control box. Condenser coils constructed with copper tubing and enhanced aluminium fins. Copeland Scroll compressor with fewer moving parts. Grille/Motor mount for quiet fan operation. L x W x H. 24.75×24.75 x 24.25. 24.75 x 24.75 x 32.5. 28.75 x 28.75 x 24.25. 28.75 x 28.75 x 32.50. 33.94 x 33.94 x 35.56. Feature a Constant Torque motor (ECM) which provides enhanced SEER performance with most Rheem outdoor units. Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications. Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics. Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U. And cUL requirements for service disconnect. 11/2 ton [5.3 kW] through 5 ton [17.6 kW] models are between 421/2 to 57 inches [1080 to 1448 mm] tall and 22 inches [559 mm] deep. All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at. 7 kPa of external static pressure. Enhanced airflow up to. 7 external static pressure. Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing. Suitable for application in mobile homes. Cabinet air leakage less than 2.0% at 1.0 inch H2O when tested in accordance with ASHRAE Standard 193. The most compact unit design available, all standard heat air handler models only 421/2 to 57 inches [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0 foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right-hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low airside pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check. Coils have copper sweat refrigerant connections. Coils utilize Chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2 inches [51 mm] for 11/2 inch [38 mm] conduit. Front refrigerant and drain connections. 18 X 43 X 21. 21 X 51 X 21. 25 X 56 X 21. Split HVAC systems and components are designed to be installed by qualified HVAC technicians. The installation of HVAC systems includes electrical, gas, and refrigerant connections, is generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. Further, the failure to properly install HVAC equipment can raise personal safety and performance concerns. As outlined, the failure to comply with this policy could lead to violations of applicable law that are punishable by fines. At Quality Air Equipment, your. Satisfaction is our goal. In an effort to achieve this goal, and to serve you better, we have included our store policies. Please take the time to read through them, doing so will ensure your order is processed quickly and correctly. Heres what we need to know. When the driver delivers your order, it is. Important that you visually inspect all your items. If the delivered item(s) look to be damaged in anyway please. Take possession of the item(s). If you are not sure that there is damage to any of the wrapped equipment, open it up and inspect it BEFORE you sign and accept possession. For only the item that is damaged. The buyers must securely pack the merchandise the same way they originally received it. Special order equipment, are NOT returnable except; If the equipment does not match the order OR the equipment is defective when picked-up or delivered. Labor is not covered under these warranties! While we acknowledge and applaud Do-It-Yourselfers, most of the equipment listed should be installed by persons who have the proper expertise, license, and certification to do so. In fact, Federal Law prohibits anyone from opening a refrigeration system unless they are licensed and certified. Additionally, having a licensed and certified installer that does the work will only help insure years of trouble free operation. WE ARE HERE TO HELP! At Quality Air Equipment, your complete satisfaction is our number one goal. The item “3Ton 14SEER Mobile Home Electric Heating System Condenser/Air Handler with Coil” is in sale since Sunday, October 21, 2018. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Central Heating & Cooling Systems\Central Air Conditioners”. The seller is “qualityairequipment” and is located in Richardson, Texas. This item can be shipped to United States.

• BTU Cooling Rating: 36,000
• Model: WA1436AJ1NA / WH1T3617STANJA
• Number of Cool Speeds: Single
• Size: 3 tons
• Cooling BTU/Hr: 36,000
• Style: Mobile Home System
• Refrigerant: R410a
• Unit Type: Split System
• Power Phase: 1 Phase
• Power Source: Electric
• Type: Condensing Unit / Air Handler / Heat Kit
• Features: Adjustable Thermostat
• SEER Rating: 14
• MPN: Does Not Apply
• Energy Efficiency Ratio (EER): 1.5 EER
• Brand: Rheem
• Control Style: Digital
• Number of Compressors: 1
• Voltage: 208/230 V

]]> https://jamesnewtonmechanical.com/3ton-14seer-mobile-home-electric-heating-system-condenserair-handler-with-coil/feed/ 0